675917
12
Zoom out
Zoom in
Previous page
1/24
Next page
Rev 6 - 10/11/2015
4.3. Connecting suction hose, N.B. suction hose not supplied.
4.3.1. Place the supplied sealing washer (2) over the supplied suction port (1). Before using the
connector sealing washer (1) make sure that it is in good condition.
4.3.2. Offer the supplied hose connector (3) to sealing washer (2) then put the supplied hose
clamp ring (4) over hose connector and tighten in a clockwise direction.
4.3.3. Take the supplied hose clamp ring (5) over the end of the suction hose (6) then push suction
hose over the end of the hose connector. Once in place move the hose clamp into position and
tighten screw in a clockwise direction until hose is secured to prevent air entering pump and
to prevent water leakage.
4.4. Connecting the hose strainer.
4.4.1. Install the supplied hose strainer (1) (provided with the pump) on the end of the suction
hose (3) (not supplied) and secure it with a hose clamp (2). The strainer will help prevent the
pump from becoming clogged or damaged by debris.
4.4.2. The hose strainer (1) is fitted at the opposite end of the suction hose (3).
4.4.3. Take the hose clamp ring (2) and place over the end of the suction hose (3), then push
suction hose over the end of the hose strainer (1). Tighten the hose clamp ring screw (2) in a
clockwise direction until hose is firmly secured to prevent air entering pump and to prevent
water leakage.
4.5. Hose diameters.
4.5.1. The hose diameter should be no wider than the water suction port diameter. Minimum
hose diameters should be as follows:
4.5.1.1. 2" Water Pump - 50mm.
4.5.1.2. 3" Water Pump - 80mm.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57604 - HYT80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57604 - HYT80 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info