675914
13
Zoom out
Zoom in
Previous page
1/24
Next page
Rev 6 - 10/11/2015
4.6. Installing the discharged hose not supplied.
4.6.1. Connect the discharge hose(3) to the to the hose
connector (1) and hose clamp (2) provided with the pump
to install the discharge hose, then tighten the clamp.
Tighten the hose clamp ring screw in a clockwise direction
until hose is firmly secured to prevent hose becoming
detached.
4.6.2. For best results use a short, large-diameter hose as it
will reduce fluid friction and improve the pump output.
4.7. Priming the Pump.
Operating the pump is a dry unprimed condition will damage the pump seal.
If the pump has been accidently operated in a dry state, stop the engine immediately and
allow it to cool before priming.
4.7.1. Before starting the engine, place the water pump
on a flat level surface and fill the pump with water.
4.7.2. Unscrew the priming plug (1) and fill the pump
full with clean water.
4.7.3. After priming, reinstall the priming plug and
tighten.
4.7.4. DO NOT unscrew the priming plug during
operation of the water pump.
4.8. Using at high altitudes.
4.8.1. At high altitude, the standard carburetor air-fuel mixture will be excessively rich.
4.8.2. As a result output power will decrease, and fuel consumption will increase. The Air-fuel
mixture will be very likely to make the spark plug dirty and make starting difficult.
4.8.3. The engine performance can be improved by installing a main fuel jet of a smaller diameter
in the carburetor and readjusting the pilot screw. If you intend to regularly use the water
pump at altitudes greater than 1000m above sea level, contact us regarding a carburetor
modification.
4.8.4. Even with a suitable carburetor, the engine horsepower will decrease by around 3.5% for
each 300 meter increase in altitude. The effect of altitude on horsepower will be greater than
this if a carburetor modification is not made.
If a carburetor suitable to high altitude is equipped with an engine suitable to a lower altitude,
the lean air fuel mixture will lead to lower engine output power, over-heating and serious
damage.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57604 - HY50 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57604 - HY50 in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info