675848
7
Zoom out
Zoom in
Previous page
1/15
Next page
HYUNDAI
12 13
FRANÇAIS
Cleaning the inlet filter
Before use always check the inlet filter and clean
it if necessary.
Use your fingers to remove the filter from the
connection. Beware not to damage the filter.
Use your fingers to re-install the filter.
Check whether the filter has been placed into
the connection correctly.
Cleaning the nozzle (fig. F)
During use, if the water jet decreases or stops, the
nozzle needs to be cleaned.
Make sure that the machine is switched off
and that the tap of the water mains has been
closed.
Use the pricking tool (16) provided, to clean
the opening (17) in the nozzle (9).
TECHNICAL DATA 57504
Mains voltage V 230
Mains frequency Hz 50
Power input W 1,600
Operating pressure bar 90
Max. operating pressure bar 135
Water consumption l/min 5.5
Max. pressure water supply bar 4
Max. water temperature °C 50
Weight kg 8.5
GUARANTEE
Refer to the enclosed guarantee conditions for the
terms and conditions of guarantee.
ENVIRONMENT
Disposal
Your product, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
Subject to change; specifications can be changed
without further notice.
POSSIBLE PROBLEMS AND SOLUTIONS
Symptom Possible causes Corrective actions
No detergent 1. Soap holder is clogged 1. Clean soap holder with warm
water
2. Replace soap holder
Unit begins to smoke 1. Overheated, overloaded or
damaged motor
1. Turn off unit and call the
dealer
Pressure cleaner does not start
up
1. Unit is pressurized
2. Plug is not well connected or
electric socket is faulty
3. Extension cord is too long or
wire size too small
4. Main voltage supply is too low
5. Thermal safety switch has
tripped
1. Squeeze trigger on gun
2. Check plug, socket and fuse
3. Remove extension cord
4. Check that main supply
voltage age is adequate
5. Switch off unit and allow
motor to cool down
Pump does not reach necessary
pressure
1. Water inlet filter is clogged
2. Pump is sucking air from
hose connections
3. Nozzle is worn or not correct
size
4. Unloader is clogged or worn
5. Valves is clogged or worn
1. Clean water inlet lter
2. Check that connections and
locking ring are properly
tightened
3. Call the dealer
4. Call the dealer
5. Call the dealer
Fluctuating pressure 1. Pump is sucking air
2. Clogged nozzle
3. Valves dirty, worm or stuck
4. Water seals worn
1. Check that hoses and
connections are tight
2. Clean with pricking tool
3. Call the dealer
4. Call the dealer
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57504 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info