675905
25
Zoom out
Zoom in
Previous page
1/40
Next page
25
7.42 Using The Machine
7.43 The wood chipper can process a wide variety of dry or green organic materials such as
branches, pruning, stalks, vines, leaves and vegetable matter.
7.44 The maximum capacity is:
HYCH1500E-2 100mm Diameter
HYCH7070E-2 - 70mm Diameter
7.45 Maximum diameters depend upon the type and hardness of the wood.
7.46 Rotate the wood as you feed it into the machine as this will improve performance.
7.47 Feed limbs and branches in butt end first, leaving the bushy head on.
This helps the limb go down the feed hopper and reduces the spinning and bouncing of
small pieces back up the feed hopper.
Some branches may require pre-cutting so that the branch will ‘self-feed’ more
efficiently.
7.48 It is advisable to process freshly cut materials as wooden branched get very hard and
springy when fried out and become more awkward to handle by making the knives blunt
more quickly.
7.49 While operating the machine, keep a wooden stick handy, approximately 30mm
diameter x 600mm long.
This stick will be useful to push in short, brushy and very leafy materials and keep the
feed hopper clear.
7.50 DO NOT force material into the machine.
If it does not chip well, the chipper knives may need sharpening or replacing, or the gap
between the knives and wear plate needs adjusting.
7.51 DO NOT overload the machine by feeding too much material into the feed hopper at
one time.
7.52 If you hear the speed of the engine decreasing, immediately stop feeding material into
the machine.
DO NOT resume feeding material into the machine until the engine has returned to
normal speed.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57381 - HYCH1500E-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57381 - HYCH1500E-2 in the language / languages: English as an attachment in your email.

The manual is 3,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info