675906
11
Zoom out
Zoom in
Previous page
1/24
Next page
You MUST STOP using the machine if any of the following occur.
The engine speed changes with no control.
In case of misfire
In case of high vibration.
When flames or smoke appear.
In rain or stormy weather.
If you are not familiar with this type of machine you should seek advice and guidance from
your dealer.
DO NOT attempt to lift or move the machine while the engine is running.
5.1. Machine use.
5.1.1. Position the machine in such a way that it cannot move during use, maintenance,
cleaning, adjustment, assembly of accessories or spare parts, as well as under storage.
5.1.2. DO NOT force the machine. Use the correct machine for your application. The correct
machine will do the job better and safer at the rate for which it is designed.
5.1.3. DO NOT change the engine governor settings or over-speed the engine. The governor
controls the maximum safe operating speed of the engine.
5.1.4. DO NOT run the engine at a high speed when you are not using it.
5.1.5. DO NOT put hands or feet near rotating parts.
5.1.6. This machine has a rotating auger drill bit capable of causing serious injury so AT ALL
TIMES you MUST keep hands and feet clear of all moving parts. Failure to observe these
safety instructions could result in serious injury or death.
5.1.7. Avoid contact with hot fuel, oil, exhaust fumes and hot surfaces.
5.1.8. DO NOT touch or allow clothing and other flammable materials to come into contact
with the engine or muffler. These parts get extremely hot from operation. They remain hot
for a short time after you turn off the unit. Allow the engine to cool before doing
maintenance or making adjustments.
5.1.9. If the machine should start to make an unusual noise or vibration, immediately shut
off the engine, disconnect the spark plug HT lead, and check for the cause. Unusual noise or
vibration is generally a warning of trouble. You MUST find the source of the problem and fix it
before reusing the machine.
5.1.10. Use only attachments and accessories approved by the manufacturer. Failure to do so
can result in personal injury, and may invalidate any warranty.
5.1.11. Maintain the machine and check for misalignment or binding of moving parts, broken
parts and any other condition that may affect the machine’s operation. If damaged, have the
machine repaired before reuse.
5.1.12. Keep the engine, exhaust and muffler free of grass, leaves, excessive grease or carbon
build up to reduce the chance of a fire hazard.
Page 11
Ver 3- December 2016
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57341 - HYEA5080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57341 - HYEA5080 in the language / languages: English as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info