675866

Hyundai 57301 Manual

13
Zoom out
Zoom in
Previous page
1/32
Next page
13
ENGLISH
• Allow the device about 45 seconds to warm
up.
• To eliminate weeds, hold the nozzle over the
weeds for about 5 seconds. During these 5
seconds the cell structure of the weed is
destroyed. As a result, the weed dies within a
few days.
• It is not necessary to completely burn the
weeds, 5 seconds is more than sufficient.
• For an efficient treatment the nozzle should be
held around 0 to 5 cm above the weeds.
• The effects are not visible immediately but will
take a while before they can be seen. It is
more of a long-term effect.
• In the case of very leafy plants, the treatment
may have to be repeated several times at
intervals of 1 1 2 weeks.
Paint removal
The paint removal can be used for various
purposes, such as:
• Removing old paint and gloss.
• Removing self-adhesive labels.
• Bonding of PVC labels.
• Removing vinyl wallpaper.
• Fast drying of damp equipment.
• Shrink packaging.
• Defrosting of water pipes.
• Loosening of nuts and bolts.
The paint removal is always done
without the use of the extension handle.
• Remove the extension handle by pulling out
the locking ring and turning the extension
handle a quarter turn to the left.
• Attach a desired nozzle (10) onto the device.
• Insert the plug into the socket.
• Check to ensure the nozzle is not blocked
before turning the device on.
• Set the temperature to setting II.
Barbecue/fireplace lighter
The barbecue and fireplace lighter is
always to be used without the
extension handle.
• Remove the extension handle by pulling out
the locking ring and turning the extension
handle a quarter turn to the left.
• .Attach the barbecue nozzle (11) onto the
device
• Select temperature setting II.
• Place the nozzle under the coal or the wood.
• Ensure that the firelighter is properly
positioned
• Insert the plug into the socket.
• Check to ensure the nozzle is not blocked
before turning the device on.
• Remove the device from the coals or the wood
as soon as it starts to glow
• Now blow hot air into the coals or wood from a
distance of around 5 - 10 cm, until the coals or
wood is burning properly.
• Doing this will help to avoid damaging the
nozzle attachment. Exposing the nozzle to
high temperatures for a prolonged period of
time could cause the material to melt. Please
follow these instructions to achieve long-term
enjoyment with the product.
• Switch off the device before removing from the
fire.
Watch Out! To avoid overheating of the
barbecue or fireplace do not use the
device for longer than necessary.
COOLING DOWN
With the aid of the stand (2), it is possible to lay
down the appliance while it is cooling down.
• Leave device to run for at least one minute in
position I.
• Switch off the device.
• Pull the plug out of the socket.
• Allow the appliance to cool down further.
• Remove the accessories.
CLEANING AND MAINTENANCE
Firstly let the unit run in position I for at
least one minute to lower the
temperature to
50 °C.
Disconnect the mains plug from the socket and
allow the appliance to cool down completely!
If possible, clean the appliance after each use.
Use a damp cloth, on stubborn dirt use a brush.
Do not use cleaning agents such as benzine,
alcohol, ammonia, etc. These substances attack
the plastic parts.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57301 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57301 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info