675908
36
Zoom out
Zoom in
Previous page
1/44
Next page
Page 36
6.7. Storage.
If you do not follow these steps, deposit may arise in the carburetor. This will cause starting difficulties
and may cause permanent damage.
6.7.1. Perform all the general maintenance that the maintenance section of your ‘User Manual’ is
recommended.
6.7.2. Clean the outside of the machine, shields, nylon cutting head, brush cutter, hedge trimmer and
chainsaw.
6.7.3. Remove all fuel from the fuel tank.
6.7.4. After all the fuel is drained, start theengine.
6.7.5. Allow the engine to run in idle until engine stops alone. This allows the fuel to be removed from
the carburetor.
6.7.6. Allow engine to cool down (about 5 minutes).
6.7.7. Use a spark plug wrench, remove the sparkplug.
6.7.8. Pour 1 teaspoon of clean 2-cycle oil into the combustion chamber. Slowly pull the starter rope
several times to coat internal components. Replace the sparkplug.
6.7.9. Store the machine in a cool, dry place away from any source of ignition such as an oil burner,
water heater etc.
6.8. Transporting the machine.
6.8.1. When transporting the machine make sure that no fuel is allowed to leak out.
6.8.2. DO NOT allow the trimmer/brush cutter/Hedge trimmer come into contact with persons,
animals and property.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57183 - HYMT5200 Multi-tool at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57183 - HYMT5200 Multi-tool in the language / languages: English as an attachment in your email.

The manual is 2,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info