Manual Hyundai 57132 - HYBC5200 (page 7 of 40) (English)

675897

Zoom out

Zoom in

1/40

arning against flying objects wear helmet,

goggles and ear protection.

arning: Danger from hot components,

especially exhaust - Keep clear of combustible

materials.

10. Additional safety instructions.

1.10.1. This machine may only be used for

trimming grass, weeds and brushwood. Never

use for other purposes, as this may result in

serious injury! Safety instructions must be

observed. DO NOT EXPOSE YOURSELF OR

OTHERS TO THE RISKS. Follow these general

instructions -

• ALWAYS wear safety goggles for eye

rotection.

• Long hair must be tied back.

• DO NOT wear loose clothing or jewelry tha

ould get caught in moving parts of the

machine. Safe, strong, non-slip safety shoes

should be worn.

• It is recommended that the legs and feet

are fully protected, to protect themselves

during the operation against flying objects.

.10.2. Check the entire machine for

loose/missing parts (nuts, bolts, screws, etc.).

Tighten/ replace before using the machine. DO

NOT use accessories with this machine other

than those recommended/supplied by the

manufacturer. Otherwise serious injuries to

the user or bystanders as well as damage to

the machine will result.

• Keep the handles free of oil and fuel.

• ALWAYS use the correct interface handles

and shoulder strap.

• DO NOT smoke when mixing fuel or when

filling the tank.

• DO NOT mix fuel in an enclosed area or

near open fires.

• Make sure sufficient ventilation

ventilation.

• Mix and store the fuel mixture in a

correctly marked container, which is

allowed by local regulations.

1.10.3. During and after use the engine and

exhaust will be very HOT you must keep all your

all parts of your body and clothing including all

combustible materials clear of the engine and

exhaust.

1.10.4. DO NOT use the machine during or

after rain, snow or sleet. The floor will become

slippery. DO NOT use the machine on a slope

or uneven ground or if there is the chance of

slipping or losing the stability.

1.10.5. If you trip or fall whilst machine is in

use you MUST immediately release the

throttle, and turn off the ignition switch.

1.10.6. If you hit any obstacles you must stop

the machine and remove the HT lead so that

you can inspect the machine. IF the machine is

damaged in any way you MUST get it repaired

before restarting work.

1.10.7. DO NOT use a damaged machine or a

machine with a blunt, cracked or damaged

cutter blade or trimmer head.

1.10.8. When using the blade cutter there is a

danger of kickback. Kickback is a reaction that

can occur when the rotating cutting blade

strikes an object which cannot be cut. This

contact causes the cutting blade to stop for an

instant and then suddenly repel from the

object taken with accelerated force. This

reaction can be violent enough that the

operator momentary loses control of the

machine. A kickback can occur without

warning when the cutter encounters an

unseen obstacle when the blade is running.

This is more likely in areas where it is difficult

to properly check the material/area to be cut.

For easy and safe cutting, cut the weeds/brush

from right to your left.

1.10.9. If any trimmed materials get tangled in

the nylon cord or cutting blade you MUST stop

the machine and remove the HT lead. Onley

then can you clear any blockages.

Page 7

Rev 3 - September 2016

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57132 - HYBC5200 in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hyundai 57132 - HYBC5200 Manual

Product: