675910
18
Zoom out
Zoom in
Previous page
1/24
Next page
MAINTENANCE
Maintenance sc
hedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the
Maintenance section. The user must only carry out the maintenance and service work described in this Operator’s
Manual. More extensive work must be carried out by an authorized service workshop.
Maintenance Before use:
After 40 hours
in use
After 100 hours
in use
Clean the outside of the machine. After each time the machine is used
Make sure the throttle trigger lock and the throttle function
correctly from a safety point of view.
X
In order to reduce the risk of fire, dirt, leaves and surplus
lubricant, etc must be cleaned from the muffler, exhaust
pipe and engine.
X
Check that the stop switch works correctly. X
Check that the blades do not move when the engine is
idling.
X
Check that the blades are undamaged and show no signs
of cracking or other damage. Replace the blades if
necessary.
X
Check that the blade guard is not damaged or distorted.
Replace the blade if the blade guard is bent or damaged.
X
Replace the cutting unit if it is bent or damaged. X
Check that the hand guard is not damaged. Replace the
guard if damaged.
X
Check that nuts and screws are tight. X
Check that there are no fuel leaks from the engine, tank
or
fuel lines
.
X
Clean the air filter and oil it in.
Clean more often if conditions are exceptionally dusty.
(25 tim).
Check the starter and starter cord. X
Check that the vibration damping elements are not
damaged.
X
Clean the outside of the spark plug. Remove it and check
the electrode gap. Adjust the gap to 0.5 mm or replace the
spark plug. Check that the spark plug is fitted with a
suppressor.
X
Clean the machine’s cooling system. X
Clean the outside of the carburettor and the space around it.
X
Fill the gear housing with grease
. This should be carried out
appro
ximately every 25 working hours.
X
Check that the screws that hold the blades together are
correctly tightened.
X
Check and clean the spark arrestor mesh on the muffler
(only applies to mufflers fitted with a catalytic converter).
X
Clean the inside of the fuel tank. X
Check the inside of the fuel filter for any dirt or if the fuel
hose has any cracks or other defects. Replace if necessary.
X
Check all cables and connections. X
Check the clutch, clutch spr
ings and the clutch drum for wear.
Replace if necessary by an autorized service workshop.
X
Replace the spark plug.
Check that the spark plug is fitted
with a suppressor.
X
Page 18
Rev 1
18


Need help? Post your question in this forum.

Forumrules
1

Forum

hyundai-57131---hyt2622-3

Reset search

  • where can i get a replacment carb an air filter for model hyt2622-3 Submitted on 10-6-2022 at 13:22

    Reply Report abuse
  • where can i get a replacement carbureta and air filter for model hyt2622-3 Submitted on 10-6-2022 at 13:20

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 57131 - HYT2622-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 57131 - HYT2622-3 in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info