675873

Hyundai 56660 Manual

4
Zoom out
Zoom in
Previous page
1/9
Next page
HYUNDAI
6 7
ENGLISH
GUARANTEE
Refer to the enclosed guarantee conditions for the
terms and conditions of guarantee.
ENVIRONMENT
Disposal
Your product, accessories and packaging should
be sorted for environmental-friendly recycling.
Do not dispose of power tools into domestic
waste. According to the European Guideline
2002/96/EC for Waste Electrical and Electronic
Equipment and its implementation into national
right, power tools that are no longer usable must
be collected separately and disposed of in an
environmentally friendly way.
Subject to change; specications can be changed
without further notice.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
• Regularly clean the ventilation slots.
TECHNICAL DATA 56660
Mains voltage V 230-240
Mains frequency Hz 50
Power input W 160
No load speed min
-1
12.000
Sanding surface mm 90 x 187
Weight kg 1,2
NOISE AND VIBRATION
Typically the A-weighted sound pressure level of
the machine is 81 dB(A).
Uncertainty K = 3.0 dB(A).
The noise level when working can exceed
92 dB(A).
Wear hearing protection!
Vibration emission value a
h
= 9.176 m/s
2
.
Uncertainty K = 1.5 m/s
2
.
The package contains the following parts:
Finishing sander
2 sheets sanding paper
Instruction manual
Safety warnings
Guarantee and service
Fitting sanding sheets (g. A)
With clamps
• Open the paper clamps (3).
• Take sanding paper of the required grain size
and place it on the sanding pad (4). Make sure
that the perforation in the paper correspond
with those on the sanding pad.
• Fold the sanding paper at both ends around
the edges of the sanding pad.
• Close the paper clamps one by one. Make
sure that the ends of the sanding paper are
clamped.
With hook & loop attachment
• Press the paper firmly on the sanding pad.
Make sure that the perforation in the paper
correspond with those on the sanding pad.
The sanding paper must be tted rmly
on the sanding pad and should not
come loose.
The dust extraction connector (2) together with an
external vacuum cleaner takes care of the dust
extraction of the working surface.
• Slide the suction mouth of a vacuum cleaner
onto the connection (3).
Switching on and off (g. A)
• To switch on the machine press the on/off
switch (1).
• To switch off the machine, release the on/off
switch (1).
• To switch the machine to continuous mode,
press the front part of the on/off switch (1).
Then release the on/off switch.
• To switch off continuous mode, press the rear
part of the on/off switch (1).
Never use the machine for sanding
magnesium workpieces.
FINISHING SANDER
56660
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, re and/or serious
injury. Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the
enclosed safety warnings as well as the additional
safety warnings.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or
damage to the machine.
ADDITIONAL SAFETY INSTRUCTIONS FOR
SANDERS
• Observe the applicable regulations when
sanding painted surfaces.
• Whenever possible, use a vacuum extractor
for dust collection.
• Remove dust and other waste matter in an
environmentally safe way.
• Take special care when sanding lead based
paint:
- All persons entering the work area, must
wear a mask specially designed for protec-
tion against lead paint dust and fumes.
- Children and pregnant women must not enter
the work area.
- Do not eat, drink or smoke in the work area .
ELECTRICAL SAFETY
Always check that the power supply
corresponds to the voltage on the
rating plate.
DESCRIPTION (g. A)
Your nishing sander has been designed for
sanding applications.
1. On/off switch
2. Dust extraction connection
3. Paper clamps
4. Sanding pad
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 56660 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 56660 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info