675868
11
Zoom out
Zoom in
Previous page
1/28
Next page
11
ENGLISH
Setting Applications
I
Cooling the hot parts
Cooling the machine before
changing the nozzle
II
Drying paint and varnish
Removing stickers
Waxing and de-waxing
Drying wet timber prior to filling
Shrinking PVC wrapping and
insulation tubes
Thawing frozen pipes
III
Welding plastics
Bending plastic pipes and sheets
Loosening rusted or tightly fastened
nuts and bolts
Removing paint and lacquer
Soldering plumbing joints
Use of the correct nozzle
Nozzles could be used with the heat gun for
different applications.
Reduction nozzle (5)
Welding, shrink sleeving (heat
concentrated over small area).
Fishtail nozzle (6)
Drying, thawing (heat spread over
wider area).
Glass protection nozzle (7)
Protection windows when stripping
frames.
Reflector nozzle (8)
Soldering pipes.
Make sure that the tool is switched off
and the nozzle has cooled down.
Falling down nozzle can set an object
on fire. Nozzles must be mounted
firmly and secure on the unit.
Touching a hot nozzle can lead to
serious burns .Before attaching or
replacing a nozzle, allow the unit to
cool down completely or use a suitable
tool.
A hot nozzle can set a surface on fire.
Place down hot nozzles only on
fire-proof surfaces.
An incorrect or defective nozzle can
lead to heat accumulation and damage
the unit.
Stationary use
This tool can also be used in stationary mode.
Place the tool onto the workbench.
Secure the cable to prevent pulling the tool off
the workbench.
Carefully switch the tool on.
Make sure that the nozzle always
points away from you and any
bystanders. Make sure not to drop
anything into the nozzle.
Troubleshooting
In case the hot air gun does not work well, we
give you subjoined some possible causes and
their solutions.
The engine gets overheated
The ventilation slots of the hot air gun are dirty.
Clean the ventilation slots.
The hot air gun does not start when it is
witched on
Interruption in the electrical circuit.
Check the mains lead and the mains plug.
The switch is defective.
Pull the mains lead out of the wall socket,
because there is a chance of fire risk ! Have the
hot air gun repaired at your local dealer.
The engine does not work, but it does heat
Interruption in the electrical circuit.
Pull the mains lead out of the wall socket,
because there is a chance of fire risk ! Have the
hot air gun repaired at your local dealer.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 56552 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 56552 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info