675869

Hyundai 56551 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
HYUNDAI
8
Switching off
• Set the on/off switch to position ‘I’ and let it run
for a few minutes.
• Then set the on/off switch to position ‘0’.
• Let the tool cool down before moving or
storing it.
Immediately switch off the appliance when
• Plug and/or cable are defective or damaged.
• The switch is defective.
• You smell or see smoke caused by scorched
insulation from the hot air gun.
When the temperature is excess
600° C, the heats switches it off
automatically, however, the heater
continues to run. When the heater has
cooled to operating temperature, the
heater is switched on again.
Use of accessories (fig. B)
Fishtail nozzle (6)
Deflects air away from glass for
example when stripping paint in
window frames or softening putty.
Reduction nozzle (7)
Distributes air equally over small
areas.
Stationary use
This tool can also be used in stationary mode.
• Unfold the hang hook and place the tool onto
the workbench.
• Secure the cable to prevent pulling the tool off
the workbench.
• Carefully switch the tool on.
Make sure that the nozzle always
points away from you and any
bystanders. Make sure not to drop
anything into the nozzle.
Troubleshooting
In case the hot air gun does not work well, we
give you subjoined some possible causes and
their solutions.
The engine gets overheated
The ventilation slots of the hot air gun are dirty.
Clean the ventilation slots.
PACKAGE CONTENTS
The package contains the following parts:
Hot-air gun
Reduction nozzle
Fishtail nozzle
Manual
Safety warnings
Guarantee and service
DESCRIPTION (FIG. A)
Your hot-air gun has been designed for the
following operations:
- removing paint and paint residues from wood,
metal and synthetics;
- removing self-adhesive labels;
- applying PVC labels;
- moulding low-temperature materials, including
acrylics and perspex;
- melting together synthetics, including materials
and foils with a PVC layer;
- shrinktubing;
- heating pipe attachments and bowing pipes;
- repairing skis, surf boards and similar sporting
equipment.
1. On/off switch
2. Air flow outlet
3. Handle
4. Ventilation opening
5. Hang hook
6. Reduction nozzle
7. Fishtail nozzle
Instructions for use
• Aim the mouthpiece of the machine at the
workpiece.
• Heat the material a few seconds before
working it.
• If required set a higher or lower level
temperature by opening or closing the
ventilation opening.
• For optimum result it is recommended to test
the machine first on a small part of the
workpiece.
Switching on (fig. A)
The tool can be switched on to two different
temperature settings.
• To switch the machine on to the low setting,
set the on/off switch (1) to ‘I’.
• To switch the machine on to the high setting,
set the on/off switch to ‘II’.
• Some smoke may be emitted after switching
on; this does not indicate a problem.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 56551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 56551 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info