675858
5
Zoom out
Zoom in
Previous page
1/11
Next page
HYUNDAI
8 9
ENGLISH
Switching on and off
To run the machine, slide the on/off-switch (1)
in the direction of the grinding wheel.
To switch off the machine, you slide the on/
off-switch (1) back.
CLEANING AND MAINTENANCE
The machine does not require any special main-
tenance.
Make sure that the ventilation openings are
kept clean. Especially when working in a dusty
environment.
- Before removing dust always unplug the tool.
- Do not use brushes of metal or the like to
remove dust and avoid damaging the internal
parts.
TECHNICAL DATA 56400
Mains voltage V 230-240
Mains frequency Hz 50
Power input W 750
No load speed min
-1
12,000
Wheel diameter mm 125
Spindle thread M14
Weight kg 1.89
NOISE AND VIBRATION
Typically the A-weighted sound pressure level of
the machine is 90.2 dB(A).
Uncertainty K = 3.0 dB(A).
The noise level when working can exceed
101.2 dB(A).
Wear hearing protection!
Vibration emission value a
h,AG
= 9.931 m/s
2
Uncertainty K = 1.5 m/s
2
.
GUARANTEE
Refer to the enclosed guarantee conditions for the
terms and conditions of guarantee.
Make sure that the grinding wheel has the
correct dimensions and fits properly on the
spindle.
Treat grinding wheels with great care in
accordance with the instructions supplied with
the grinding wheel.
Inspect the grinding wheel before every use.
Do not use cracked or otherwise damaged
grinding discs.
Make sure that the grinding wheel is mounted
in accordance with the instructions.
After mounting the grinding wheel let the
machine run at no load speed in a safe area. If
the machine vibrates strongly or if you see
damages in the grinding wheel, switch off the
machine immediately and try to establish the
cause.
Do not use adapters or other aids to mount
grinding wheels with a different spindle
diameter.
Make sure that the workpiece is properly
supported or fixed.
Never use a cut-off wheel for deburring.
Make sure that sparks cannot hit any persons
or set flammable materials alight.
Always wear safety goggles, hearing
protection and if necessary other protective
means, such as working gloves, coat, hard
hat, etc.
Mount the screening guard. Never use the
machine without screening guard fitted.
Make sure that the ventilation openings are
kept clean. Especially when working in a dusty
environment.
- Before removing dust always unplug the tool.
- Do not use brushes of metal or the like to
remove dust and avoid damaging the internal
parts.
Beware that after switching off the tool the
wheel continues to rotate for a short period.
ELECTRICAL SAFETY
Always check that the power supply
corresponds to the voltage on the
rating plate.
ANGLE GRINDER
56400
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, re and/or serious
injury. Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the
enclosed safety warnings as well as the additional
safety warnings.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or
damage to the machine.
Fire hazard..
You will nd the following symbols on the
machine:
Take measures to protect your eyes.
Consult the manual.
ADDITIONAL SAFETY INSTRUCTIONS FOR
ANGLE GRINDERS
Do not cut or grind light metal with a
magnesium content exceeding 80%;
since this type of metal is ammable.
Do not use any other accessories than
grinding wheels.
Make sure that the speed stated on the
grinding wheel is larger or the same as the
speed of the angle grinder given on the rating
plate.
Do not cut workpieces requiring a maximum
depth of cut exceeding that of the grinding
wheel.
DESCRIPTION (g. A)
Your angle grinder has been designed for grinding
and cutting masonry and steel. Equipped with an
auto-stop function for maximum safety.
1. On/off switch
2. Side handle
3. Lock knob
4. Spindle
5. Guard
6. Nut
The package contains the following parts:
Angle grinder
Side handle
Guard
Spanner
Nut M14
Set of carbon brushes
Instruction manual
Safety warnings
Guarantee and service
Mounting and removing the guard
Place the machine with the spindle upwards on
a table
Place the guard (5) over the spindle (4).
Tighten the nut (6) firmly.
To remove the guard, proceed in reverse order.
Never use the machine without guard.
Mounting and removing a grinding wheel
Place the machine on a table, guard up.
Fit the spacer onto the spindle.
Place the grinding wheel on the spacer.
Screw the tension nut onto the spindle.
Press the lock knob and firmly tighten the
tension nut using the spanner supplied.
Release the lock knob.
To remove the grinding wheel, proceed in reverse
order.
Prior to mounting or removing a
grinding wheel always unplug the tool.
Mounting and removing the side handle
Tighten the side handle in one of the mounting
holes.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 56400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 56400 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info