675860

Hyundai 56112 Manual

5
Zoom out
Zoom in
Previous page
1/13
Next page
HYUNDAI
8 9
ENGLISH
Positioning and removing a drill or screw bit
(fig. A)
This tool is equipped with a keyless chuck (5).
• Open the chuck by turning the collar (6).
• Insert the drill or screw bit in the chuck.
• Close the chuck by firmly tightening the collar
(6) while holding the rear part of the chuck with
the other hand.
• In order to remove the drill or screw bit
proceed in reverse order.
Before positioning or removing a drill or
screw bit always remove the battery
from the machine.
Forward/reverse switch (fig. A)
• Push the forward/reverse switch (2) to the left
to drill holes and fasten screws.
• Push the forward/reverse switch (2) to the right
to loosen screws.
Always wait until the motor has come
to a complete standstill before
changing the direction of rotation.
Adjusting the torque (fig. A)
This machine has been fitted with an adjustable
coupling to limit the torque when tightening
screws.
• Turn the adjustment collar (4) clockwise to
reduce the torque and counterclockwise to
• increase the torque. The correct setting
depends on the type and size of the screw and
the work piece.
• In case of doubt, start with the lowest setting
and increase the torque until you have
reached the desired result.
• For drilling, turn the adjustment collar to the
drilling symbol.
Switching on and off (fig. A)
• To switch on the machine, press the on/off
switch (1).
• To switch off the machine, release the on/off
switch.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
• Regularly clean the ventilation slots.
ELECTRICAL SAFETY
Always check that the battery power
corresponds to the voltage on the
rating plate. Also make sure that the
voltage of your charger corresponds to
that of your mains.
DESCRIPTION (FIG. A)
Your rechargeable drill/screwdriver has been
designed for drilling in wood, metal, stone and
plastics and for screwdriving applications.
1. On/off switch
2. Forward/reverse switch
3. LED light
4. Torque adjustment collar
5. Chuck
6. Collar
7. Battery
8. Battery release button
Charging the battery
The battery (7) must be charged before first use.
Only after several charge and discharge cycles
the battery will attain full capacity.
• Connect the power adapter (9) to the battery.
• Plug the power adapter into the power outlet.
• Charge the battery for 3-5 hours.
The red charging indicator lights when the battery
is being charged.
The green charging indicator lights when the
battery has been fully charged.
Never charge the battery for more than
5 hours. If the red indicator does not
light, the battery may be too warm. In
this case let the battery cool down
before charging.
To install the battery (fig. B)
Slide the battery into the base of the drill until it
clicks into place.
To remove the battery (fig. C)
Press the battery release button (8) and slide the
battery from the base of the drill.
LED light (3)
Your drill/screwdriver is equipped with a LED light.
The LED light will light when you operate the
machine, providing the work area to be lighted.
• Only use the charger in a dry environment at a
temperature between 10 °C and 40 °C.
• Do not use the charger when it has been
damaged.
• Only have the charger and battery repaired by
an authorized repair agent.
• Prevent the battery from short circuiting. Make
sure that the battery connections cannot touch
metal objects.
• Do not store the battery where the temperature
may rise above 40 °C, e.g. in a car which has
been parked in the sun.
• Do not burn the battery.
• Never attempt to open the battery.
• In case of skin contact of the battery fluid,
flush immediately with abundant water.
Neutralize with a mild acid such as lemon juice
or vinegar. In case of eye contact, rinse
abundantly for 10 minutes with clean water
and consult a physician.
Pictograms on charger and battery
The following pictograms have been applied to
the charger:
Indoor use only.
Double insulated.
SFail-safe isolating transformer.
Cut-out switch.
Read this manual carefully before
using the machine.
The following pictograms have been applied to
the battery:
Do not incinerate battery.
Do not expose charger and battery to
temperatures above 40 °C.
Do not expose charger and battery to
water.
Do not dispose of the battery in
unsuitable containers.
RECHARGEABLE DRILL/
SCREWDRIVER
56112
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious
injury.Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the
enclosed safety warnings as well as the additional
safety warnings.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or
damage to the machine.
ADDITIONAL SAFETY INSTRUCTIONS FOR
RECHARGEABLE MACHINES
• Remove the battery from the machine during
maintenance and when the machine will not
• be used for a longer period of time.
• Only use the prescribed type of battery (see
• the technical data).
WARNING! This device produces an
electromagnetic field during operation.
This field may interfere in certain
circumstances with active or passive
medical implants. To reduce the risk of
serious or fatal injury, we recommend
that persons with medical implants
consult their physician and the medical
implant manufacturer before using this
device.
SAFETY INSTRUCTIONS FOR CHARGER AND
BATTERY
• Read the general instructions and safety
instructions carefully before charging the
battery.
• Only use the prescribed charger to charge the
battery. Do not charge batteries of another
type with this charger. Mains adaptors are only
to be used together with the charger socket
and the accompanying battery.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hyundai 56112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hyundai 56112 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info