661320
33
Zoom out
Zoom in
Previous page
1/196
Next page
- 31 -
8. Troubleshooting
8.1 Error code display on LED wire controller
Malfunction
Error code
Reason
Solution
Inlet water temperature
sensor failure
PP1
The sensor in open or short
circuit
Check or change the sensor
Outlet water temperature
sensor failure
PP2
The sensor in open or short
circuit
Check or change the sensor
Heating condenser
sensor failure
PP3
The sensor in open or short
circuit
Check or change the sensor
Gas return sensor failure
PP4
Connect some wire wrongly on
gas return sensor position
Confirm there is nothing on this
point, restart the machine
Ambient temperature
sensor failure
PP5
The sensor in open or short
circuit
Check or change the sensor
Temperature difference
between water inlet and
outlet is too much
PP6
Water flow volume not
enough ,water pressure
difference is too low
Check the water flow volume or
water jammed or not
Cooling outlet water
temperature is too low
PP7
Water flow volume is not
enough
Check the water flow or water
system is jammed or not
First grade antifreeze
protection in Winter
PP7
Ambient temperature or water
inlet temperature is too low
Water pump will run
automatically for first grade
antifreeze
Second grade antifreeze
protection in Winter
PP7
Ambient temperature or water
inlet temperature is too low
Heat pump will start heating for
second grade antifreeze
Cooling condenser
sensor failure
PP8
Connect some wire wrongly on
gas return sensor position
Confirm there is nothing on this
point, restart the machine
High pressure protection
EE1
1. Refrigerant is too much
2. Air flow is not enough
1. Discharge redundant
refrigerant from HP gas
system
2. Clean the air exchanger
Low pressure protection
EE2
1. Refrigerant is not enough
2. Water flow is not enough
3. Filter jammed or capillary
jammed
1. Check if there is any gas
leakage ,re-fill the
refrigerant
2. Clean the air exchanger
3. Replace the filter or
capillary
Flow switch closed
EE3 or "ON"
Low water flow, wrong flow
direction, or flow switch failure.
Check if the water flow is
enough and flow in right
direction, or else the flow switch
could be failed.
Power supply
connections wrong (for 3
phase unit)
EE4
Wrong connection or lack of
connection
Check the connection of power
cable
Inlet and outlet water
temperature difference
malfunction
EE5
Water flow volume is not
enough ,water pressure
difference is too low
Check the water flow rate ,or
water system is jammed or not
Communication failure
EE8
Wire connection is not good
Check the wire connection
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hydro-Pro 22T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hydro-Pro 22T in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 14,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hydro-Pro 22T

Hydro-Pro 22T Usermanual and installation guide - Dutch - 35 pages

Hydro-Pro 22T User Manual - Dutch - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info