813010
9
Zoom out
Zoom in
Previous page
1/24
Next page
9
D
C
B
B Lighting up
The phase indicator shows that the system is in
the lighting up phase. The symbol is displayed
after the door has been opened on a cold stove,
or in the case where the standby / start icon of the
IHS SmartControl™ app has been pressed. If the
flue gas temperature does not increase within 
minutes, the HWAM® SmartControl™ will automat-
ically shut o the air supply and return to standby
mode. See the section on correct firing process on
page .
NOTE: To ensure complete combustion e-
ciency it is important to obtain a suciently
high flue gas temperature. Failing this, HWAM®
SmartControl™ emits a restoking alarm, even if
there is unburned wood and flames.
C Combustion
The phase indicator shows that the system is in
the combustion phase and has exited the light-
ing up stage. The system automatically regulates
combustion, ensuring optimum combustion and a
room temperature as close to the desired level as
possible.
D Ember phase
The phase indicator shows that the system is in
ember phase. In this phase there will be mainly
only embers in the stove, and the system will now
also be able to calculate the expected time for the
next restoking (described in a following section).
The system automatically gives an alert regarding
the correct restocking time. It is recommended that
you wait before restoking until the restoke alarm is
emitted, as the expected firewood saving is oth-
erwise not achievable. If there is a big dierence
between actual and desired room temperature,
the restoking alarm comes on, even though there
is unburned wood and flames. Failure to restoke at
this time, will lead to a new restoking alarm being
emitted, which constitutes the last opportunity to
restoke without new lighting up.
NOTE: The best and most economical combus-
tion is achieved by following the recommended
stoking time carefully.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam SmartControl Generation 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam SmartControl Generation 2 in the language / languages: English as an attachment in your email.

The manual is 4.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam SmartControl Generation 2

Hwam SmartControl Generation 2 User Manual - German - 24 pages

Hwam SmartControl Generation 2 User Manual - Dutch - 24 pages

Hwam SmartControl Generation 2 User Manual - French - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info