Manual Hwam 4640 (page 44 of 48) (English, Danish, Swedish, Norwegian)

613742

Zoom out

Zoom in

1/48

Insufcient ring

If the reproof materials in the combustion chamber are blackened after a re, then the stove is polluting,

and the automatic air ow regulation system is malfunctioning. Therefore, more air must be supplied by

turning the regulator clockwise (to the right). It may also be necessary to burn more wood.

How to achieve the best combustion

• Use clean and dry wood.

Wet wood results in inefcient combustion, plenty of smoke, and soot. Furthermore, the heat will dry

the wood, not heat up the room.

• The re should only be stoked with a little wood at a time.

You achieve the best combustion by starting up a re often and using only a little wood. If you use

too much rewood, it will take some time before the temperature reaches a level where you achieve

a good combustion.

• Make sure there is the right amount of air.

You should also make sure that there is plenty of air – especially in the beginning - so the temperature

in the wood burning stove climbs quickly. In this way the gasses and particles released during the

combustion will be consumed by the re. Otherwise they build up soot in the chimney (constituting

a chimney re risk) or will be released in a non-combusted state into the environment. The wrong

amount of air supply creates inefcient combustion and a modest effect.

• Don’t savour the re during night time.

We advise against adding re wood to your stove and reducing the air supply at night in an attempt

to still have some embers left in the morning. If you do so, large amounts of hazardous smoke will be

emitted, and your chimney will be exposed to unnecessarily large amounts of soot with the risk of a

chimney re.

Cleaning the glass

We recommend wiping the glass after a re. This is best done using a paper towel.

Types of fuel

The stove may be damaged by very high temperatures and the glass may turn white, for example. This

can be avoided by never allowing the stove to burn with the door open and taking great care with types

of fuel that develop excessive heat, such as briquettes.

We recommend using birch or beechwood, which has been split and stored for at least one year outdoors

under cover. Wood stored indoors tends to become too dry and burn too quickly.

Briquettes give off a lot of heat. Certain types expand considerably, thus causing an uncontrollable combustion.

The stove is EN 13240 approved for ring wood only. No particle board, lacquered, painted

or treated wood, plastics, or rubber may be burned.

maIntenance

Cleaning

Any maintenance of the stove should only be carried out when it is cold. Daily maintenance is limited to

vacuum cleaning the stove externally, using the soft brush attachment. You can also dust the stove using a

dry, soft cloth or brush. But remember, only when the stove is cold. Do not use water, spirit or any other

kind of cleaner, as this will damage the lacquer.

Once a year, the stove should be thoroughly serviced. The combustion chamber should be cleared of ashes

and soot. The hinges and the closing hook must be greased with liquid copper fat spray (heat-resistant up

to 1100°C), see drawing I. Lift the door approx. ½ cm and spray copper fat onto the hinge leaf.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 4640 in the language / languages: English, Danish, Swedish, Norwegian as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 4640

Hwam 4640 User Manual - Dutch, French - 28 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hwam 4640 Manual

Product: