Manual Hwam 4110 (page 16 of 20) (English)

744529

Zoom out

Zoom in

1/20

Page 16 of 20 pages

FIrIng In gEnEral

Rapid or ﬁerce heat

Rapid or ﬁerce heat is obtained by burning many small pieces of wood.

Maximum amounts of fuel:

The maximum allowed amount of fuel per hour is:

Wood: 2.4 kg

If these limits are exceeded, the stove will no longer be covered by the factory guarantee, and it may

also become damaged due to excessive heat, the glass may turn white, for example.. The stove has been

approved for intermittent use.

Typical re-ﬁring interval at nominel performance

Wood: 45 min (1,03 kg)

Prolonged burning time

The longest burning time is achieved by pushing the air control lever to the leftmost position when the

ﬂames are about to die. This will ensure the longest period with embers. When adding new ﬁrewood,

always remember to check that the wood has caught ﬁre properly. If not, the air supply must be increased

by pushing the air control lever to the right.

For the slowest possible combustion, turn the regulator counter-clockwise (to the left). By turning the

regulator all the way to the left, the stove receives no primary air (the air that comes through the grate).

The stove cannot be lit after a new ﬁring without the regulator being turned to the right, which allows

primary air to enter the unit.

Insufﬁcient ﬁring

If the ﬁreproof materials in the combustion chamber are blackened after a ﬁre, then the stove is polluting,

and the HWAM

Autopilot™ system is malfunctioning. Therefore, more air must be supplied by pushing

the air control lever to the right. It may also be necessary to burn more wood.

How to achieve the best combustion

• Use clean and dry wood

Wet wood results in inefﬁcient combustion, plenty of smoke, and soot. Furthermore, the heat will dry

the wood, not heat up the room.

• The ﬁre should only be stoked with a little wood at a time

You achieve the best combustion by starting up a ﬁre often and using only a little wood. If you use

too much ﬁrewood, it will take some time before the temperature reaches a level where you achieve

a good combustion.

• Make sure there is the right amount of air

You should also make sure that there is plenty of air – especially in the beginning - so the temperature

in the wood burning stove climbs quickly. In this way the gasses and particles released during the

combustion will be consumed by the ﬁre. Otherwise they build up soot in the chimney (constituting

a chimney ﬁre risk) or will be released in a non-combusted state into the environment. The wrong

amount of air supply creates inefﬁcient combustion and a modest effect.

• Don’t savour the ﬁre during night time

We advise against adding ﬁre wood to your stove and reducing the air supply at night in an attempt to still

have some embers left in the morning. If you do so, large amounts of hazardous smoke will be emitted, and

your chimney will be exposed to unnecessarily large amounts of soot with the risk of a chimney ﬁre.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 4110 in the language / languages: English as an attachment in your email.

The manual is 1,43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 4110

Hwam 4110 User Manual - German - 20 pages

Hwam 4110 User Manual - Dutch - 20 pages

Hwam 4110 User Manual - French - 20 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hwam 4110 Manual

Product: