613759
54
Zoom out
Zoom in
Previous page
1/60
Next page
54
maIntenance
Maintenance should only be carried out on the stove when it is cold. The stove only requires a mini-
mum of daily maintenance.
Emptying the ashpan, drawing E
HWAM 3310 and HWAM 3320 are equipped with a socket for sucking out ash from the ashpot.
Remove the cover plate (if used) over the shaking grate. Open the ash hatch in the lower part of the
stove. Turn the wheel (2) beneath the stove one turn in the direction of the arrow, which shakes the
ash from the combustion chamber down into the ashpot, and at the same time sweep in the direction
of the socket opening (repeat if the ashpot is very full). Remove the socket cap (3), fit the ash bucket
hose on the socket and turn on the motor/vacuum cleaner.
Note: The ash must be completely cold before you remove it from the stove! Please note that there
may be embers in the ashes for up to 24 hours after the fire has gone out!
Cleaning
The easiest is to vacuum clean the stove on the outside using a small nozzle with soft brush-es. You can
also wipe the stove clean using a dry, soft cloth or a soft duster. But remember only to do it when the
stove is cold! Do not use water, spirit or any other kind of cleaner, as this will damage the lacquer.
Thorough maintenance should be performed on the stove each year. Remove all ash and soot from
the combustion chamber.
Service
The stove should have a thorough preventive service check at least every other year. This service
check includes the following:
Thorough cleaning of the stove
Checking of the door lift and possibly greasing with copper grease
Check the spring in the automatic unit and replace if necessary.
Checking gaskets. Replace gaskets if they are not intact or have softened
Inspection of springs for chain drive. Inspection to ensure that the chain drive is equal on both sides,
and that the door closes tightly all the way around.
Checking of heat insulating material and possibly replacement
Checking of the bottom/shaking grate
All service checks must be performed by an authorised fitter.
Use only original spare parts.
Cleaning
Before sweeping, the regulator knob must be turned to the minimum setting to prevent soot and ash
from entering the automatic system.
Drawing B:
Remove the baffle plate (1). Push the plate forward and lift it up and slightly sideways. Tilt down one side;
the plate is now free and can be removed from the combustion chamber. Remove the iron baffle plate
(2). Straighten the transport lock (5). Lift the plate off the hooks (6) after which it may be removed.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam 3310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 3310 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 3310

Hwam 3310 User Manual - German, Danish, Swedish, Norwegian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info