571925
12
Zoom out
Zoom in
Previous page
1/36
Next page
12
Room Temperature
The room temperature is shown in the centre of the display. The room temperature
is measured in the location of the remote control. The actual room temperature is
used both when controlling the combustion and in connection with the timing of
the re-stoking alarm. The remote control should hence not be placed close to the
stove or in direct sunlight, since it will be affected by unnaturally high heat levels.
Thermostat adjustment
The HWAM Autopilot IHS
TM
has a thermostat function, which attempts to keep
the room temperature at the desired level. The thermostat works like a radiator.
Use the remote control to choose the level you want and the temperature that
suits your rooms.
The thermostat function can be adjusted to six different levels:
(Level 0 - 5, where level 3 is a medium temperature of approx. 22-24° C).
Level 0: regulates to the slowest combustion (3-4 kW) no room temperature control.
Level 1-2: regulates to low room temperature (approx. 18-22° C)
Level 3: regulates to middle room temperature (approx. 22-24° C)
Level 4: regulates to high room temperature (approx. 24-26° C)
Level 5: regulates to the maximum room temperature (approx. 27-29° C). This level
aims to reach the highest possible room temperature in the shortest possible time.
This choice can be an advantage if you want to heat up an unheated room as quickly
as possible. When the temperature in the room approaches the desired level, the
desired heat level is entered on the remote control.
The Status Line
The status line appears at the bottom of the display. It shows where in the combus
-
tion the system is located.
Not in contact with the Air box.
In contact – but in standby mode.
The initial phase of the combustion.
The process phase of the combustion.
The burning out phase of the combustion.
Ligthing the fire:
The woodburning stove is ready to be lit and opens the dampers. The symbol appears
when you press the remote control twice in either standby or burning out modes.
The symbol is also shown if you press the remote control twice in the burning out
phase. In this case it does not mean that you need to light up again. This is merely
information that you have asked the stove to open the dampers and thereby ensure
that the new firewood gets sufficient air to catch fire.
21°C
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam 2640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 2640 in the language / languages: English, Italian as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 2640

Hwam 2640 User Manual - German, Dutch, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info