571925
9
Zoom out
Zoom in
Previous page
1/36
Next page
9
Vertical cross-section of smoke flue (Drawing B and C)
B: Top smoke outlet C: Rear smoke outlet
Steel chimney (9).
Flue gas elbow (10). Fits into smoke flue socket.
Brick-built jamb of flue (11).
Built-in pipe sleeve (12). Fits smoke flue.
Wall rosette (13). Covers disruption to wall around pipe sleeve.
Joint (14). Sealed with packing material.
Smoke outlets (15) of the HWAM stove.
Smoke flue regulating damper (16).
Soot door (17).
Fitting the loose parts
Before the stove is installed, you must ensure that all loose parts are fitted correctly.
Vertical cross-section of the stoves (Drawing B):
The smoke shelf (5): Should rest on the rear plate and on the stand uppermost in the front of the
combustion chamber.
The baffle plate (6): Is suspended on two hooks, one in either side uppermost in the combustion chamber.
To mount the baffle plate, lift it to a position at the very top of the combustion chamber, and then push
it back until it falls into place in the two hooks. When the stove is installed, the transport protection
(6a) is removed. Lift the smoke shelf up and forward. Then lower it and remove it from the combustion
chamber. Subsequently, the transport protection (6a) is bent downwards/forwards until it is vertical.
The cast iron bottom plate (7): Must be in a flat position at the bottom of the combustion chamber.
Air grate (8). Place the accompanying air grate on the cast-iron bottom of the combustion chamber, as
far up front as possible and with the slats pointing backwards. The grate is positioned correctly when
grate and bottom slot together.
Connecting and preparing the HWAM Autopilot IHS
TM
1. Connect the plug
a) to a normal 230V socket
b) to the Air box in the wood section underneath the combustion chamber (lead the plug through
the air slot at the bottom between the side and rear plates - on the left side of the wood-burning
stove when seen from the front. There is a mark on the Air box where the plug should be let in. See
the photo of the power supply on the Air box.
Air box without power supply Air box with power supply
2. Insert three AA batteries in the remote control. When the IHS logo disappears from the display, the
remote control is ready to use.
3. The remote control and the wood-burning stove must be connected (the factory will see to this).
If the status line at the bottom of the display is clear (empty) (
)and divided
into three sections, the wood-burning stove and the remote control are connected.
If the status line is dotted ( ), the remote control and the wood-burning stove
are not connected. Start with a display in which the light is off, and make the connection by pressing
and holding down the button, so the advanced menu is displayed. Then press the button repeatedly
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hwam 2640 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hwam 2640 in the language / languages: English, Italian as an attachment in your email.

The manual is 3,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hwam 2640

Hwam 2640 User Manual - German, Dutch, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info