627068

Huvema HU 460 X 1500 VAC Manual

9
Zoom out
Zoom in
Previous page
1/60
Next page
9
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
6. elecTric circUiT conTrol
6.1 elecTric WirinG
You can find the electric control box by open the metal cover behind the lathe bed. Connect the terminals “R”,“S” and
“T” to power source. Note that the specification of the electric wires must be above 8 square mm of its cross section
area. Power switch of the machine and power source should be with fuse and the machine ought to be grounded.
6.2 elecTric deVice
• The electric panel is equipped with cut-off device and solenoid contactor for avoiding from overloaded
breakdown of motor.
• Tumbler Rotation Switch connects with Micro Switch.
• Foot brake is connected with micro switch, braking prior to the manually starting. Whenever you release the foot
brake, you need to re-operate Spindle Control Lever again to resume the operation of main spindle.
• On top of the control box, there exist a “INTERMITTENT” button for intermittent operation of the spindle.
6.3 imporTanT noTes
**Check the rotating direction of spindle after wiring:
• Turn on the power switch.
• Slightly push “INTERMITTENT” button.
• Look at the rotating direction of Main Spindle from Tailstock.
• If it is of anti-clockwise, you’ve got a right wiring.
• If oppositely, exchange any of two wires among “R” “S” “T” terminals.
**If the power indicating lamp is on but you cannot start the motor. Thus, it is overloaded.
If it happens the current out of limit, the cut-off device will activate immediately. In this moment, please turn off the
power then press slightly the recovery plate near cut-off device in the control box. It will work again. (Electric circuit
program as illustrated on the next pages.)
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 460 X 1500 VAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 460 X 1500 VAC in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info