627068

Huvema HU 460 X 1500 VAC Manual

6
Zoom out
Zoom in
Previous page
1/60
Next page
6
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED CHANG E S AND T YPI N G ERRORS RESERVED
4. UnpackinG and insTallaTion
4.1 poinTs for UnpackinG
For short distance transportation of this machine, fix it onto the truck by hemp rope: while for long distance, packed
by a wooden case or dispatched by container. Please first to check if there is any damage on packing when arrive.
After unpacking carefully inspect whether it exists any injury or insufficiency. If any contact us immediately for
proper settlement or any of the damages of the machine will receive no any compensation from us.
4.2 UnloadinG of The machine
When the machine is unloaded from the car or to be moved, please proceed with following steps (illustration 1)
• Preparing two round sticks (long approx.830mm diameter 40mm) insert into the preserved holes on lathe bed.
Then lift up with applying wires on both end of the stick.
• Lifting the machine by a crane.
• Before lifting adjust the position of Lathe Apron and Tailstock to maintain the balance of machine.
• When the machine was shifted to its destination. always handle with care to put it down. Don’t let go of it to hit
the ground or it will affect the accuracy of the machine.
Note: Machine weight can be seen in Specification Table.
• For the adjustment of electric control, keep the distance between machine and wall not less than 600mm.
4.3 consTrUcTion of The GroUnd
Due to the recent tendency of utilizing ultra-hard alloy steel tools, it surely increase
the speed of heavy cutting comparing to the previous steel tools. But, in the mean
time, it easily happens to the vibration of the machine. For assuring better cutting
result, it requires a very strong and steady construction of ground. (Please refer to
right illustration of construction of ground)
4.4 cleaninG
All our machine are with a anti-rust oil layer before delivery. After inspection, please
remove to clean the slide ways, lead screw, shafts and other polished parts by a
soft cloth with cleanser (do not use gasoline or cellulose solvent to avoid fire or
explosion). Then apply a thin layer of oil for lubricating purpose. Push those movable parts such as: Tool Holder,
Tailstock back and forth.
Illustration 1
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 460 X 1500 VAC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 460 X 1500 VAC in the language / languages: English as an attachment in your email.

The manual is 4,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info