627049
17
Zoom out
Zoom in
Previous page
1/24
Next page
17
10. elektrIkanlage
Abbildung H – Schaltplan
H1 Motor M1 H5 Elektromagnetischer Schalter ESA1
H2 Warnungslampe HL1 H6 Stromunterbrecher QF1
H3 Lichtschalter SX1 H7 Erde PE
H4 Schalter QS1 H8 Kabeleinfuhrkasten B1
10.1. allgemeInes
Die Nennspannung der Maschine ist 400V/50Hz, 3-Phasen. Die Übertragung wird von einem 2 Geschwindig-
keiten-, AC Asynchron-Motor angetrieben. Die Geschwindigkeiten werden mit einem Schalter eingestellt.
Der Schaltschrank ist auf der Rückseite des Spindelgehäuses montiert. Der Not-Aus Schalter und die anderen
Schalter befinden sich an der linken Seite des Spindelgehäuses (siehe Bild A). Wenn der Schalter auf die Position
«1» oder «2» eingestellt wird, beträgt die Drehgeschwindigkeit 960 bzw. 1450 U/min. Wenn der Schalter auf
«R» eingestellt wird, dreht die Spindel sich rückwärts, Gewindeschneiden ist jetzt möglich. Ist der Schalter auf
Position «0» eingestellt, dann schaltet die Maschine aus.
Der Motor wird von einem 3VU1340 Schalter (QF1) vor Überlastung geschützt. Außerdem wird die Maschine von
einem elektromagnetischen Schalter ESA 1 geschützt, diese kann als Not-Aus funktionieren. Um die Sicherheit
des Bedieners zu gewährleisten, ist das elektrische System mit einem Erdanschluß ausgestattet.
10.2. stromkreIs
Abbildung I und J – Elektrisches Diagram
J1 Elektromagnetischer Schalter Schaltplan J4 Innere Verbindungen
J2 Kontaktsymboldiagram J5 Außere Verbindungen
J3 Ein/Aus-Karte
11. zuberteIle
Nr. Beschreibung
Sachnummer oder
Zeichnungsnummer
Spezifikation Menge
1 Bohrfutterschlüssel GB6087 1-13 1
2 Befestigungsstreifen vom Bohrfutter ZD-3C-50-201 1
3 Kurze Hülle für Werkzeugaufnahme JB3477 3-2 1
Kurze Hülle für Werkzeugaufnahme JB3477 3-1 1
4 Keil für Werkzeugaufnahme JB3482 Keil 1 1
5 Sechskantmutter GB6170 M12 4
6 Fundamentschraube GB799 M12 x 300 4
7 Unterlegscheibe GB97.2 12 4
8 Doppel-Gabelschlüssel GB4388 22 x 24 4
9 Glühlampe 24V, 25W 1
ÄNDERUNGEN UND IRRTÜMER VORBEHALTEN ÄNDERUNGEN UND IRRTÜMER VORBEHALTEN
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 30 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 30 T in the language / languages: German as an attachment in your email.

The manual is 3,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 30 T

Huvema HU 30 T User Manual - English - 24 pages

Huvema HU 30 T User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info