627039
7
Zoom out
Zoom in
Previous page
1/20
Next page
7
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
7. conTrol panel
A: Speed indicator (rpm) F: Warning light
B: Drill/Tap switch G: Start button
C: Speed control switch H: Power light
D: Emergency stop I: Stop button
E: Feed depth adjustment
Check the power source. Push the start button to check if the motor and spindle shaft are in normal working
condition.
Spindle speed adjustment is controlled by the speed control switch. The speed is shown in the digital speed
indicator.
In case of an emergency, push the emergency button.
Drill/tap switch: for changing the machine from drilling mode to tapping mode and vice versa.
7.1 T-grooves
There are T grooves in the worktable and the base. They are used to fix the work piece.
3-1. Control panel instruction:
A. min-1 or /min (R.P.M.) Indicator
B. Drill / Tap Switch
C. Speed Control Switch
D. Emergency Stop Button (For CE)
E. Feed Depth Adjustment
F. Fault Light
G. Start Button
H. Power Light
I. Stop Button
1. Check the power source
Push the start button to judge the motor and spindle shaft is in normal condition or not.
2. Spindle speed adjustment is controlled by the speed control switch. The speed will be
showed out in the electronic digital meter.
3. If it needs to stop urgently, just push the emergency stop switch.
4. Drill / Tap switch: For changing the machine to Drill Mode or Tap Mode.
9
3-1. Control panel instruction:
A. min-1 or /min (R.P.M.) Indicator
B. Drill / Tap Switch
C. Speed Control Switch
D. Emergency Stop Button (For CE)
E. Feed Depth Adjustment
F. Fault Light
G. Start Button
H. Power Light
I. Stop Button
1. Check the power source
Push the start button to judge the motor and spindle shaft is in normal condition or not.
2. Spindle speed adjustment is controlled by the speed control switch. The speed will be
showed out in the electronic digital meter.
3. If it needs to stop urgently, just push the emergency stop switch.
4. Drill / Tap switch: For changing the machine to Drill Mode or Tap Mode.
9
Figure 5
3-2. Operation illustration and procedure:
1. There are three T grooves in the worktable. It is used to fix the work piece.
1-1.There are two T grooves in the base, too. It is convenient for fixing the longer, heavier and larger
working piece.
(Option)
2. These machines have special design for tapping, a quick change device. During tapping, if you
want spindle to turn reversely and withdraw tapping tip, just pull up grip handle only(as shown
in Figure 12.) If you want to continue to operate, just press down grip handle. (as shown in
Figure 13.)
3. Protect safety guard shall be allocated in a proper position in operation. It is controlled by a micro
witch. (For CE)
10
Figure 12
Figure 13
Lock
Loose
Figure 6
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 20 SUPERTAP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 20 SUPERTAP in the language / languages: English as an attachment in your email.

The manual is 4,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 20 SUPERTAP

Huvema HU 20 SUPERTAP User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info