627035
5
Zoom out
Zoom in
Previous page
1/16
Next page
5
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
CHANG E S AND T YPI N G ERRORS RESERVED
4. feaTUres
Model HU 16 Super
Drilling capacity 16 mm
Spindle taper MT2
Distance column-spindle 180 mm
Drilling depth 80 mm
Speed range 300-2360 rpm (12)
Max. distance spindle-table 510 mm
Column diameter 80 mm
Motor power 0.75 kW
Weight 78 kg
Voltage 230 V
5. insTalling The machine
Install the machine on a concrete floor. Consider existing and anticipated needs, the size of material to be processed
through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location
for your machine. See figures below.
1-5Site Considerations
Working Clearances
Consider existing and anticipated needs, size of material to be processed through each machine, and
space for auxiliary stands, work tables or other machinery when establishing a location for your
machine. See Figure 01.
for the minimum working clearances of the Model JTD-16series
A
620mm
B
390mm
1-6Items Needed for Set Up
1.Column and Base
The column must be secured on the base toproperly assemble your drill press.
To secure the column to the base:
1. Place the column on the base and align themounting holes.
2. Secure the column to the base with the fourhex bolts, as shown in Figure 02
4
Figure 01
Figure 02
4.Slide the arbor into the spindle socket whileslowly rotating the drill chuck. The socket hasa
rectangular pocket where the tang (or flatportion of the arbor shown in Figure 21) fitsinto.
5.Seat the chuck with a rubber mallet, as shownin Figure 22.
1-8.Setting the machine instruction:
1.The machine base with setting hole will be set on concrete floor.
The outlined procedures of setting the machine
MODEL
AREA
SETTED SCREW
JTD-16 series X=800×600 M10
2
.The dimension of setting hole:
JTD-16series
10
Figure 21
Figure 22
Wood
Tang-SideUp
X = 800x600 mm
Use M10 set screws
Figure 3
Figure 2
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 16 SUPER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 16 SUPER in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 16 SUPER

Huvema HU 16 SUPER User Manual - German - 16 pages

Huvema HU 16 SUPER User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info