627060
39
Zoom out
Zoom in
Previous page
1/48
Next page
39
CHANGES AND TYPING ERRORS RESERVED CHANGES AND TYPING ERRORS RESERVED
10
Move to the smallest value.
Switch to absolute mode.
Select the axis.
Enter the number of segments and conrm.
In g. 1
In g. 2
Enter the segment lengths and conrm.
Find the mechanical origin. There are two options:
Choose the actual position as origin.1.
Choose the rst absolute zero of the encoder as 2.
origin.
Enter the correction factor of segment 1. Move the slide
for the X-axis in positive direction.
If the encoder has moved over the total length of the
correction factor, the display on the Y-axis is dimmed and
a new value can be entered.
The Y-axis will display the value of the X-axis. This means
that the compensation factor has been stored.
Enter the value of segment 2.
Enter the value of segment 3.
Enter the value of segment 4.
Enter the value of segment 5.
Enter the value of segment 6.
Close.
Cancellation of segmented correction factor
Proceed as follows:
Follow the method as described above. In every case when a number of correction factors have to be
entered, enter the value of 0 to cancel. Alle stored values will now disappear.
Finding the function of mechanical origin
The mechanical origin has to be found again when the encoder moved, or in case of power loss or
deactivation of the digital readout. The display will show incorrect values if the mechanical origin can
not be found again.
The starting point is regarded as mechanical origin. Proceed as follows:
Move the encoder to the position that was the original mechanical origin and select segmented 1.
error correction. Do not enter a number of segments or the length of them. Press
to skip.
Select the mode to choose the correction method and press . The readout will select 2.
automatically.
Press immediately to end the setup of the error correction. 3.
6
5
lengths
Y
X
Y
X
Y
X
Y
X
Y
X
Y
X
3
4
5
6
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Huvema HU 1010 B-4 SINO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Huvema HU 1010 B-4 SINO in the language / languages: English as an attachment in your email.

The manual is 7,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Huvema HU 1010 B-4 SINO

Huvema HU 1010 B-4 SINO User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info