780487
71
Zoom out
Zoom in
Previous page
1/140
Next page
BRAKE SYSTEM 13
69
13.1 Anti-lock braking system (ABS)
H02679-10
ABS module 1, which consists of a hydraulic unit, ABS control
unit, and return pump, is installed under the fuel tank. One wheel
speed sensor 2is located in each case on the front and the
rear wheel.
Warning
Danger of accidentsChanges to the vehicle impair the
function of the ABS.
Do not make any changes to the suspension travel.
Only use spare parts on the brake system which have
been approved and recommended by Husqvarna
Motorcycles.
Only use tires/wheels approved by Husqvarna Motor-
cycles with the corresponding speed index.
Maintain the specified tire pressure.
Ensure that service work and repairs are performed
professionally. (Your authorized Husqvarna Motorcy-
cles workshop will be glad to help.)
The ABS is a safety system that prevents locking of the wheels
when driving straight ahead without the influence of lateral
forces.
Warning
Danger of accidentsDriving aids can reduce the prob-
ability of a fall only within physical limits.
It is not always possible to compensate for extreme rid-
ing situations, for example with luggage loaded with
a high center of gravity, varying road surfaces, steep
descents or full braking without disengaging the gear.
Adapt your riding style to the road conditions and
your driving ability.
The ABS operates with two independent brake circuits (front and
rear brakes). During normal operation, the brake system operates
like a conventional brake system without ABS. When the ABS
control unit detects a locking tendency in a wheel, ABS begins
regulating the brake pressure. The control function causes a
slight pulsing of the hand and foot brake levers.
The ABS warning lamp 3must light up after the ignition is
switched on and go out after starting off. If it does not go out
after starting off or if it lights up while riding, this indicates a
malfunction in the ABS. In this case, the ABS is no longer
enabled and the wheels may lock during braking. The brake
system itself stays functional; only ABS control is not available.
The ABS warning lamp may also light up if the rotating speeds
of the front and rear wheels differ greatly under extreme riding
conditions, for example when making "wheelies" or if the rear
wheel spins. This causes the ABS to switch off.
To reactivate the ABS, stop the vehicle and switch off the igni-
tion. The ABS is reactivated when the vehicle is switched on
again. The ABS warning lamp goes out when you start off.
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Vitpilen 401 - 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Vitpilen 401 - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Vitpilen 401 - 2022

Husqvarna Vitpilen 401 - 2022 User Manual - German - 144 pages

Husqvarna Vitpilen 401 - 2022 User Manual - Dutch - 143 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info