780487
57
Zoom out
Zoom in
Previous page
1/140
Next page
SERVICE WORK ON THE CHASSIS 12
55
F02716-10
Main work
Push dust boots 1of both fork legs downward.
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
Warning
Danger of accidentsOil or grease on the brake
discs reduces the braking effect.
Always keep the brake discs free of oil and
grease.
Clean the brake discs with brake cleaner when
necessary.
Clean and oil the dust boots and inside fork tubes of both
fork legs.
Universal oil spray ( p. 130)
Press the dust boots back into the installation position.
Remove the excess oil.
Finishing work
Take the motorcycle off the front lifting gear. ( p. 54)
Remove the rear of the motorcycle from the lifting gear.
( p. 52)
12.6 Removing the seat
H02672-10
Insert the ignition key in seat lock 1and turn it clockwise.
Raise the rear of the seat, pull the seat back, and lift it off.
Remove the ignition key.
12.7 Mounting the seat
H02673-10
Hook holding lug 1of the seat onto the fuel tank, lower the
rear and push it forward.
Insert locking pin 2into the lock housing and push down
the rear of the seat until the locking pin engages with a click.
Check that the seat is correctly mounted.
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Vitpilen 401 - 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Vitpilen 401 - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Vitpilen 401 - 2022

Husqvarna Vitpilen 401 - 2022 User Manual - German - 144 pages

Husqvarna Vitpilen 401 - 2022 User Manual - Dutch - 143 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info