656863

Husqvarna-Viking METAL HOOP 180-130 Manual

2
Zoom out
Zoom in
Previous page
1/4
Next page
METAL HOOP 180x130mm – User Instructions
Included with your Metal Hoop 180x130mm is a template and four
magnets.
The hoop has a flocked surface to prevent the fabric from sliding. There
are raised markings on the hoop indicating the center of the embroidery
area. When positioning the fabric in the hoop, you can easily feel the
raised markings (ill. A) through the fabric with your finger tips.
The template has both inch and cm measurements. There are also slits in
the template through which you can make markings on the hoop with a
water soluble marking pen (ill. B). Use the lines as a guide when lining
up your project/fabric to be embroidered.
MAGNETS
The magnets are used to fix fabric to the hoop or to keep excess fabric
away from the embroidery area. Place the magnets evenly spaced on the
hoop for best embroidery result.
Note: There is an extra set of four magnets avialable as an optional
accessory, (#620132696, INSPIRA™ Magnet Set 4 pcs). They can be
used to fix the fabric more securely to the hoop when not using adhesive
stabilizer.
To remove the magnets from the hoop, pinch around the magnet and lift
it upwards. You can also turn the magnet towards the edge of the hoop.
Lift it off when a part of the magnet is outside the hoop.
When you are not using the magnets we recommend that you store
them on top of each other as illustrated to the right (ill. C). If you leave
the magnets on the hoop when they are not used, they can damage the
flocked surface of the hoop.
Some fabrics are more difficult to hoop than others or should not be hooped at all, since hooping can damage
the fabric. Thick and coarse fabrics can be difficult to hoop but also thin and glossy fabrics. Hooping ready-to-
wear garments is difficult or impossible due to seams, narrow areas or buttons/rivets. When using the Metal Hoop
180x130mm hooping won't be a problem!
When you want to embroider on quilts or other projects where you do not want residuals from stabilizer on the back
side, the Metal Hoop 180x130mm is perfect! Embroider without stabilizer.
Embroidering several designs after each other or doing endless embroideries is easy, just remove the magnets and
move the fabric. Ready to embroider the next design in no time!
A
B
C
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna-Viking METAL HOOP 180-130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna-Viking METAL HOOP 180-130 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna-Viking METAL HOOP 180-130

Husqvarna-Viking METAL HOOP 180-130 User Manual - German - 4 pages

Husqvarna-Viking METAL HOOP 180-130 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info