610291
34
Zoom out
Zoom in
Previous page
1/44
Next page
Maintenance
hints
in
most
cases
poor
sewing
results
are
due
to
a
blunt
or
damaged
needle.
Therefore
always
examine
the
needle
first
before
taking
any
other
action.
Unattractive
stitches
unattractive
seani
1.
The
needle
is
incorrectly
inserted.
See
page
10.
2.
The
needle
is
bent
or
blunt.
Change
the
needle.
3.
The
thread
tension
is
not
correct.
See
page
16.
4.
The
machine
is
incorrectly
threaded.
See
pages
13-14.
5.
The
needle,
thread
and
fabric
do
not
correspond.
See
table,
page
10.
6.
The
lower
thread
is
not
the
same
thickness
as
the
upper
thread.
7.
The
lower
thread
is
unevenly
wound.
See
pages
11-12.
8.
The
bobbin
is
incorrectly
inserted
in
the
bobbin
case.
See
page
13.
9.
Lint
or
threads
wrapped
around
the
spindle
of
the
shuttle.
See
page
34.
Needle
breaks
1.
The
needle
is
incorrectly
inserted.
See
page
10.
2.
The
throat
plate
is
too
loose.
Tighten
the
throat
plate
with
the
larger
screwdriver.
See
page
34.
3.
You
may
have
helped
the
machine
to
feed
through
the
fabric
by
pulling
it.
The
needle
can
then
easily
come
against
the
throat
plate
and
be
broken.
4.
The
needle
is
not
the
right
size.
Use
Husqvarna
Viking
705
H
needles.
Upper
thread
breaks
The
needle
iS
incorrectly
inserted.
See
page
10.
2.
The
needle
is
bent
or
blunt.
Change
the
needle.
3.
The
upper
thread
is
incorrectly
threaded.
See
page
14.
4.
The
upper
thread
is
too
tightly
tensioned.
See
thread
tension
pages
16-17.
5.
The
thread
is
knotted.
6.
The
needle
and
thread
do
not
correspond.
See
needle
and
thread
table
on
page
10.
7.
The
hole
in
the
throat
plate
is
chipped
and
has
sharp
edges.
Polish
with
an
emery
cloth
or
change
the
throat
plate.
See
page
34.
8.
The
needle
groove
or
needle
eye
has
too
sharp
edges.
Change
the
needle.
See
page
10.
9.
Thread
is
entangled
on
the
spool
pin.
Loner
thread
breaks
I.
The
bobbin
case
is
incorrectly
inserted.
See
page
13.
2.
The
lower
thread
is
incorrectly
threaded.
See
page
13.
3.
The
lower
thread
is
too
tightly
tensioned.
See
pages
16—17.
4.
The
bobbin
is
unevenly
wound.
See
pages
11—12.
5.
The
bobbin
is
wound
too
full.
See
pages
11-12.
6.
The
throat
plate
hole
is
damaged.
Polish
it
with
an
emery
cloth
or
change
the
throat
plate,
see
page
34.
7.
Lint
or
thread
is
wrapped
around
the
spindle
of
the
shuttle.
See
page
34.
35
:
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Viking 3260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Viking 3260 in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info