610292
18
Zoom out
Zoom in
Previous page
1/44
Next page
Changing
the
snap-on
presser
foot
The
presser
feet
which
accompany
the
machine
are
in
the
form
of
loose
soles
which
are
held
in
place
on
the
presser
foot
“ankle”
by
a
spring.
If
you
wish
to
change
the
presser
foot,
turn
the
hand
wheel
to
wards
you
until
the
needle
is
in
the
highest
position.
Remove
the
presser
foot
by
drawing
it
towards
you
while
pressing
slightly
downwards.
There
is
a
spring
at
the
bottom
of
the
ankle
bracket.
Slide
on
the
presser
foot
so
that
the
pin
fits
into
the
space
between
the
bracket
and
the
spring.
Then
press
lightly
backwards
and
downwards
and
the
presser
foot
will
snap
into
the
correct
position.
Changing
the
presser
foot
“ankle”
Certain
presser
feet
cannot
be
constructed
as
loose
soles
and
then
the
ankle
bracket
must
also
be
changed.
Make
sure
that
the
needle
is
in
its
highest
position.
Then
loosen
the
retaining
screw
with
the
screwdriver
and
remove
the
presser
foot.
19
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Viking 3000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Viking 3000 series in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info