Manual Husqvarna TS348XD (page 64 of 104) (English, German, Dutch, French, Italian, Spanish)

733955

Zoom out

Zoom in

1/104

To Remove Mower

• Place attachment clutch in “DIS EN GAGED” position.

• Lower attachment lift lever to its lowest position.

• Remove mower belt from electric clutch pulley (M). See

Mower Drive Belt Removal in "TO REPLACE MOWER

BLADE DRIVE BELT" in this section.

• Disconnect front link (E) from mower.

• Go to either side of mower and disconnect mower

suspension arm (A) from chassis and rear lift link (C)

from rear mower bracket (D) - remove retainer springs

and washers.

• Go to other side of mower and disconnect the suspension

arm and rear lift link.

• Remove retainer spring (G) and washer (I) from anti-sway

bar (S).

CAUTION: After rear lift links are disconnected, the at-

tachment lift lever will be spring loaded. Have a tight grip

on lift lever when changing position of the lever.

• Slide mower out from under right side of tractor.

• From right side of mower, first insert 90° end (K) of anti-

sway bar (S) into hole in transaxle bracket (T), located

near left rear tire in front of transaxle.

NOTE: Flashlight may be helpful.

To Install Mower

NOTE: Ensure tractor is on level surface and engage park ing

brake.

• Lower attachment lift lever to its lowest position.

CAUTION

: Lift lever is spring loaded. Have a tight grip on

lift lever, lower it slowly and engage in lowest position.

NOTE:

Ensure mower side suspension arms (A) are pointing

forward before sliding mower under tractor.

• Slide mower under tractor until it is centered under

tractor.

TO INSTALL ANTI-SWAY BAR (S)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TS348XD in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna TS348XD Manual

Product: