579248

Husqvarna TS 342 Manual

70
Zoom out
Zoom in
Previous page
1/100
Next page
70
6
BLADE CARE
For best results mower blades must be kept sharp. Re place
bent or damaged blades.
CAUTION: Use only a replacement blade approved
by the manufacturer of your tractor. Using a blade
not approved by the manufacturer of your tractor
is hazardous, could damage your tractor, and void
your warranty.
BLADE REPLACEMENT (See Figs. 1 - 6)
• Raise mower to highest position to allow access to blades.
CAUTION: When handling the blade, protect your
hands with gloves and/or wrap blade with heavy
cloth.
TO REMOVE BLADE
• Squeeze tabs (1) inward to release cap (2). Remove by
lifting cap (2) from hinge (3) and set aside. See Fig. 1.
• Slide thumb lock (4) and release pivot (5) to allow wire-form
(6) to swing free from standoffs (7). See Fig. 2.
• Open the top plate (8) and remove blade (9). See Fig. 3.
NOTE: Blade is held in place by magnets to prevent free release.
TO INSTALL BLADE
• Clean area under top plate (8), the bottom of the mandrel
assembly (10), and around bosses (11) thoroughly to
remove any dirt or debris.
• Align bosses (11) and insert blade. See Fig. 4.
NOTE: Magnets should hold blade (9) in place.
• Close the top plate (8) over the blade (9) and hook the
wire-form (6) over the standoffs (7).
• Push pivot (5) closed until secured by the thumb lock (4).
See Fig. 5.
• Reinstall cap (2). Hook cap (2) onto hinge (3) and rotate
onto tabs (1). Press cap (2) firmly into place, ensuring
both tabs (1) lock into cap (2). See Fig. 6.
NOTE: Replace cap (2) if worn or cracked.
Fig. 1
2
3
1
Fig. 2
4
5
6
7
Fig. 3
8
9
Fig. 4
8
10
11
9
Fig. 5
5
6
7
4
Fig. 6
2
3
1
… 70 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TS 342 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TS 342 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info