Manual Husqvarna TS 342 (page 62 of 100) (English, German, Dutch, French, Italian, Spanish)

579248

Zoom out

Zoom in

1/100

Operator Presence Sys tem and Reverse

Operation System (Ros)

Ensure operator presence and reverse operation sys tems are

work ing properly. If your tractor does not function as described,

repair the problem immediately.

• The engine should not start unless the parking brake

is engaged, and the attachment clutch con trol is in the

"DIS EN GAGED" position.

CHECK OPERATOR PRESENCE SYSTEM

• While the engine is running, any attempt by the op er a tor

to leave the seat without first setting the parking brake

should shut off the engine.

• With the engine running, the parking brake engaged, and

the at tach ment clutch engaged, any attempt by the operator

to leave the seat should shut off the attachment clutch.

• The attachment clutch should never operate unless the

operator is in the seat.

CHECK REVERSE OPERATION (ROS) SYSTEM

• With the engine running, the SmartSwitch Ignition (SSI)

button (C) solid green, and the attachment clutch engaged

any attempt by the operator to shift in reverse stop the

mower blades.

• With the engine running, the SmartSwitch Ignition (SSI)

button (C) solid green, and the ROS button (D) lit, any

attempt by the operator to shift in reverse should NOT

stop the mower blades.

Totmann- und Rückwärtsfahreinrichtung (ROS)

Kontrollieren Sie die Funktionstüchtigkeit der Totmann- und

Rückwärtsfahreinrichtung. Sollte Ihr Gartentraktor nicht

vorschriftsmäßig funktionieren, beheben Sie das Problem

sofort.

• Der Motor darf nur anspringen, wenn das Feststellbremspedal

voll durchgetreten ist und sich der Kupplungshebel des

Anbaugerätes in der “AUSGEKUPPELT” Position befindet.

KONTROLLE DER TOTMANNEINRICHTUNG

• Bei laufendem Motor muss jeder Versuch des Benutzers,

den Sitz zu verlassen, ohne die Feststellbremse zu ziehen,

umgehend den Motor abschalten.

• Bei laufendem Motor und betätigter Feststellbremse muss

jeder Versuch des Benutzers, den Sitz zu verlassen,

umgehend die Anbaugerätekupplung abschalten.

• Die Kupplung des Anbaugerätes darf nicht funktionieren,

wenn sich der Fahrer nicht auf dem Sitz befindet.

KONTROLLE DER RÜCKWÄRTSFAHREINRICHTUNG

(ROS)

• Bei laufendem Motor mit dauerhaft grün leuchtender

SmartSwitch (SSI) Zündtaste (C) und eingekuppeltem

Anbaugerät muss jeder Versuch des Benutzers, den

Rückwärtsgang einzulegen, die Mäherklingen abschalten.

• Bei laufendem Motor mit dauerhaft grün leuchtender

SmartSwitch (SSI) Zündtaste (C) und leuchtender

ROS Taste (D) darf KEIN Versuch des Benutzers, den

Rückwärtsgang einzulegen, die Mäherklingen anhalten.

Système de détection opérateur et sécurité de

marche arrière (ROS)

S’assurer que les dispositifs de sécurité (présence opérateur

et marche arrière) fonctionnent correctement. Si le tracteur

ne fonctionne pas comme décrit dans cette notice, corriger

immédiatement le problème.

• Le moteur ne doit pas démarrer si le frein de stationnement

n’est pas enclenché et si la commande d’embrayage des

lames n’est pas en position « débrayée ».

VÉRIFIER LE CAPTEUR DE PRÉSENCE OPÉRATEUR

• Lorsque le moteur tourne, si l’opérateur quitte son

siège sans avoir préalablement enclenché le frein de

stationnement, le moteur s’arrête.

• Moteur allumé, frein de stationnement enclenché et lames

embrayées, si le conducteur se lève de son siège, le moteur

doit s’arrêter.

• L’embrayage des lames ne doit jamais s’accoupler si le

conducteur n’est pas assis sur son siège.

VÉRIFIER LE DISPOSITIF DE SÉCURITÉ MARCHE

ARRIÈRE (ROS)

• Lorsque le moteur tourne et que le bouton SmartSwitch

(SSI) (C) est vert et les lames sont embrayées, si l’opérateur

tente de passer en marche arrière, les lames de la tondeuse

s’arrêtent.

• Lorsque le moteur tourne et que le bouton SmartSwitch

(SSI) (C) est vert et le bouton ROS (D) est allumé, si

l’opérateur tente de passer en marche arrière, les lames

de la tondeuse ne doivent PAS s’arrêter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TS 342 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna TS 342 Manual

Product: