579248
44
Zoom out
Zoom in
Previous page
1/100
Next page
44
5
SISTEMA DI SICUREZZA SMARTSWITCH
Il trattore è dotato di un interruttore di rilevamento della pre-
senza dell’operatore. Se l’operatore prima di lasciare il posto
di guida non inserisce il freno di stazionamento, il motore si
spegne. Per proseguire la falciatura, il trattore deve essere
riavviato. Consultare il paragrafo “PER AVVIARE IL MOTORE”
nella presente sezione del manuale.
PER INTERROMPERE L’OPERAZIONE DI FALCIATURA
Mentre si è seduti in posizione di guida, premere il pedale
del freno e inserire il freno di stazionamento.
Dopo avere inserito il freno di stazionamento, qualsiasi tentativo
dell’operatore di abbandonare il posto di guida fa arrestare le
lame del tosaerba. Il motore continua a funzionare per circa
cinque minuti, prima di spegnersi. Ciò consente all’operatore
di abbandonare momentaneamente il posto di guida per
rimuovere ostacoli senza dover poi riavviare il trattore.
PER RIPRENDERE L’OPERAZIONE DI FALCIATURA
Tornare alla postazione di guida.
Posizionare l’interruttore di innesto dell’attrezzo prima in
posizione di “DISINNESTO” e poi nella posizione di “IN-
NESTO”.
NOTA!
L’interruttore di innesto dell’attrezzo consente l’innesto
dell’attrezzo solo se l’operatore è correttamente seduto nella
postazione di guida.
SMARTSWITCH-VEILIGHEIDSSYSTEEM
Uw tractor is voorzien van een aanwezigheidsdetectieschake-
laar voor de bestuurder. Als de parkeerrem niet ingeschakeld
is voordat de bestuurder van de stoel opstaat, slaat de motor
af. Om verder te gaan met maaien moet de tractor opnieuw
worden opgestart. Zie “DE MOTOR STARTEN” in dit hoofdstuk
van de handleiding.
STOPPEN MET MAAIEN
Trap het rempedaal in en schakel de parkeerrem in terwijl
u in werkstand op de stoel zit.
Nadat de parkeerrem ingeschakeld is, stoppen de maaimes-
sen bij elke poging van de bestuurder om op te staan van
de stoel. De motor blijft nog ongeveer vijf minuten draaien
voordat hij wordt uitgeschakeld. Hierdoor kan de bestuurder
de stoel kortstondig verlaten om obstakels uit de weg te rui-
men, zonder dat hij de tractor opnieuw hoeft op te starten.
VERDERGAAN MET MAAIEN
Ga weer op de stoel zitten.
Zet de koppelingshendel eerst in de stand “UITGESCHAKE-
LD” en vervolgens in de stand “INGESCHAKELD”.
OPMERKING
De koppelingshendel kan niet goed ingeschakeld worden als
de bestuurder niet eerst op de stoel gaat zitten.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TS 342 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TS 342 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info