733943
64
Zoom out
Zoom in
Previous page
1/92
Next page
64
0254
5
6
Blades
For best results mower blades must be kept sharp. Re place
bent or damaged blades. Sharpening can be carried out with
a file or grinding disc.
NOTE: It is very important that both blades are sharpened
equally to avoid imbalance.
BLADE REMOVAL:
Raise mower to highest position to allow access to blades.
Remove blade bolt se cur ing blade.
Install new or resharpened blade with trailing edge up
towards deck as shown.
IMPORTANT: To ensure proper assembly, center hole in
blade must align with star on mandrel as sem bly.
Reassemble blade bolt and tighten securely (62-75 Nm).
IMPORTANT: Special blade bolt is grade 8 heat treated.
MESSER
Für beste Ergebnisse müssen die Mäherklingen scharf
gehalten werden. Ersetzen Sie verbogene oder beschä-
digte Klingen. Das Schärfen kann mit einer Feile oder einer
Schleifscheibe erfolgen.
HINWEIS: Es ist sehr wichtig, dass beide Klingen gleichmäßig
geschärft werden, um ein Ungleichgewicht zu vermeiden.
AUSBAU DER KLINGE:
Heben Sie den Mäher in die höchste Position an, um an
die Blätter zu kommen
Entfernen Sie die Klingenschraube, die die Klinge sichert.
Setzen Sie die neue oder nachgeschärfte Klinge mit der
hinteren Kante in Richtung des Schneidwerks ein, wie
abgebildet.
WICHTIG: Für eine korrekte Montage muss das Mittelloch
der Klinge mit dem Stern an der Spindel ausgerichtet sein.
Setzen Sie die Klingenschraube wieder ein, und ziehen
Sie diese fest an (62-75 Nm).
WICHTIG: Die spezielle Klingenschraube wurde gemäß Kat.
8 wärmebehandelt.
Lames:
Pour avoir une bonne qualité de coupe, il est in dis pens-
able d'avoir des lames bien affûtées. Changer les lames
défectueuse ou tordues. L'affûtage peut se faire avec une
lime ou avec une meule.
REMARQUE: Il est très important d'affûter en même temps
et de façon identique les deux extrémités de la lame pour
éviter tout déséquilibrage.
POUR RETIRER LES LAMES:
Relever au maximum la machine pour avoir accès aux
lames de coupe.
Enlevez le boulon de blocage de la lame.
Mettre en place une lame neuve, ou la lame d'origine
réaffutée, avec le tranchant tourné vers le haut (fond du
carter de coupe), comme indiqué sur la figure.
ATTENTION: Le montage de la lame est correct lorsque son
alésage central en forme d' étoile est parfaitement emboîtée
sur l'étoile se trouvant à l'extrémité du moyeu.
Remontez le boulon de blocage de la lame et serrez
fortement (62-75 Nm.).
ATTENTION: La vis de fixation de la lame est traitée ther-
miquement en classe 8, bien respecter le couple de serrage.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TS 138L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TS 138L in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info