518172
28
Zoom out
Zoom in
Previous page
1/48
Next page
28 – Operating the ma ine
Restart the Buttonhole?
If you are sewing a buttonhole and stop to adjust the length
settings you will get this question once you start sewing
again. If you select “Yes”, the machine will restart and sew
the buttonhole from the beginning with the new settings.
If you select “No”, the change will be cancelled and the
machine will continue sewing the rest of the buttonhole
with the previous settings. Use the arrow buttons to select
“Yes” or “No” and press the OK button.
Sensor One-Step Buttonhole Foot line up -
“Adjust white area to white line”
When you insert the fabric for sewing a buttonhole, the
wheel of the Sensor One-Step Buttonhole Foot might
move. A pop-up message prompts you to line up the white
area with the white line. Line up the white areas and close
the pop-up message by pressing the OK button.
Sensor One-Step Buttonhole
Presser Foot connected
The Sensor One-Step Buttonhole Foot can only be used
for the buttonhole stitches recommended for the foot. If
the Sensor One-Step Buttonhole Foot is connected and you
select a stitch that is not possible to sew with the foot, this
message will appear when you start to sew. Remove the foot
or select a buttonhole that can be sewn with the Sensor
One-Step Buttonhole Foot. Close the pop-up message by
pressing the OK button.
Machine Set for Free Motion Sewing
This message is shown when the machine is set to Free
Motion Floating or Free Motion Spring Action and you
turn on the machine. Close the pop-up message by pressing
the OK button.
Main Motor Overload
If you are sewing on very heavy fabric or if the machine is
blocked when sewing, the main motor can get overloaded.
The pop-up message will close when the main motor and
power supply is secure.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info