518172
9
Zoom out
Zoom in
Previous page
1/48
Next page
A
D
B
C
1
2
G ting Ready to Sew – 9
CHANGING THE PRESSER FOOT
Press the ON/OFF switch to OFF.
1. Make sure the needle is in the highest position and the
presser foot is lifted. Pull the presser foot towards you.
2. Line up the cross pin on the foot with the gap in the
presser foot ankle. Push back until the foot snaps into
place.
CHANGING THE NEEDLE
Press the ON/OFF switch to OFF.
1. Use the hole in the multipurpose tool to hold the needle.
2. Loosen the screw in the needle clamp with the
screwdriver.
3. Remove the needle.
4. Insert the new needle using the multipurpose tool.
With the Á at side away from you, push the new needle
upwards until it will go no further.
5. Use the screwdriver to tighten the screw.
NEEDLES
The sewing machine needle plays an important role in
successful sewing. To ensure you will get a quality needle,
we recommend needles of system 130/705H. The needle
package included with your machine contains needles of
the most frequently used sizes for sewing on woven and
stretch fabrics.
Universal needle (A)
Universal needles have a slightly rounded point and come in
a variety of sizes. For general sewing in a variety of fabric
types and weights.
Stretch needle (B)
Stretch needles have a special scarf to eliminate skipped
stitches when there is a Á ex in the fabric. For knits,
swimwear, Á eece, synthetic suedes and leathers. Marked
with a yellow band.
Denim needle (C)
Denim needles have a sharp point to penetrate tightly
woven fabrics without deÁ ecting the needle. For canvas,
denim, microÀ bers. Marked with a blue band.
Wing needle (D)
The Wing needle has wide wings on the side of the needle
to poke holes in the fabric when sewing entredeux and
other hemstitches on natural À ber fabrics.
Note: Change the needle often. Always use a straight needle with a
sharp point (1). A damaged needle (2) can cause skipped stitches,
breakage of needles or snapping of thread. A damaged needle can
also damage the stitch plate.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TRIBUTE 140C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TRIBUTE 140C in the language / languages: English as an attachment in your email.

The manual is 4,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna TRIBUTE 140C

Husqvarna TRIBUTE 140C User Manual - German - 48 pages

Husqvarna TRIBUTE 140C User Manual - Dutch - 48 pages

Husqvarna TRIBUTE 140C User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info