Manual Husqvarna TC 342 (page 73 of 104) (English, German, Dutch, French, Italian, Spanish)

579240

Zoom out

Zoom in

1/104

BLADE CARE

For best results mower blades must be kept sharp. Re place

bent or damaged blades.

CAUTION: Use only a replacement blade approved

by the manufacturer of your tractor. Using a blade

not approved by the manufacturer of your tractor

is hazardous, could damage your tractor, and void

your warranty.

BLADE REPLACEMENT (See Figs. 1 - 6)

• Raise mower to highest position to allow access to blades.

CAUTION: When handling the blade, protect your

hands with gloves and/or wrap blade with heavy

cloth.

TO REMOVE BLADE

• Squeeze tabs (1) inward to release cap (2). Remove by

lifting cap (2) from hinge (3) and set aside. See Fig. 1.

• Slide thumb lock (4) and release pivot (5) to allow wire-form

(6) to swing free from standoffs (7). See Fig. 2.

• Open the top plate (8) and remove blade (9). See Fig. 3.

NOTE: Blade is held in place by magnets to prevent free release.

TO INSTALL BLADE

• Clean area under top plate (8), the bottom of the mandrel

assembly (10), and around bosses (11) thoroughly to

remove any dirt or debris.

• Align bosses (11) and insert blade. See Fig. 4.

NOTE: Magnets should hold blade (9) in place.

• Close the top plate (8) over the blade (9) and hook the

wire-form (6) over the standoffs (7).

• Push pivot (5) closed until secured by the thumb lock (4).

See Fig. 5.

• Reinstall cap (2). Hook cap (2) onto hinge (3) and rotate

onto tabs (1). Press cap (2) firmly into place, ensuring

both tabs (1) lock into cap (2). See Fig. 6.

NOTE: Replace cap (2) if worn or cracked.

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TC 342 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna TC 342 Manual

Product: