733945

Husqvarna TC 138L Manual

22
Zoom out
Zoom in
Previous page
1/108
Next page
22
2
VOLANTE
• Monte el eje de extensión (8) en el eje de la dirección
(11).
• Deslice el soporte superior del eje de la dirección (9)
sobre la extensión.
• Oriente el soporte del eje de la dirección de modo que
su base descanse plana sobre el tablero superior.
• Instale cuatro (10) tornillos autorroscantes con un
destornillador Phillips n.º 2.
• Apriete a mano todos los tornillos hasta que queden
al ras con el soporte de eje de la dirección, a continu-
ación, apriételos otros 90 grados.
NOTA: No apriete los tornillos demasiado.
• Monte la tapa del eje principal (6). Asegúrese de que
las guías de la tapa encajan en sus respectivos orifi-
cios.
• Retire el adaptador del volante (7) del volante de
dirección (5) y deslícelo (12) sobre el eje de la direc-
ción (14). Compruebe que las ruedas delanteras están
alineadas hacia delante y coloque el volante en el eje.
• Monte la arandela plana grande (4), la arandela de
presión (3) y el perno (2). Apriete con fuerza.
• Encaje la tapa (1) en el centro del volante.
VOLANTE
• Montare la prolunga (8) sull'albero dello sterzo (11).
• Scorrere il supporto superiore dello sterzo (9) sulla
prolunga.
• Orientare il supporto dello sterzo in modo che la base
poggi sulla parte superiore del cruscotto.
• Installare quattro viti autofilettanti (10) utilizzando un
cacciavite Phillips n. 2.
• Serrare manualmente ogni vite finché non è a filo con il
supporto dello sterzo, quindi ruotare di altri 90 gradi.
NOTA: non serrare eccessivamente le viti.
• Montare il coperchio dell'albero principale (6). Assicu-
rarsi che le linguette di guida del coperchio si inserisca-
no correttamente nei rispettivi fori.
• Rimuovere l’adattatore (7) dal volante (5) e infilare
l’adattatore sull’albero dello sterzo. Controllare che le
ruote anteriori siano allineate in avanti e posizionare la
ruota sul mozzo.
• Montare la rondella piana grande (4), la rondella di
sicurezza (3) e il bullone (2). Serrare.
• Innestare l'inserto (1) al centro del volante.
STUURWIEL
• Monteer het asverlengstuk (8) op de stuuras (11).
• Schuif de bovenste stuurbevestiging (9) op het verleng-
stuk.
• Breng de stuurbevestiging zo aan dat de onderkant
vlak tegen het bovenste dashboard ligt.
• Breng met behulp van een #2 kruiskopschroevendraai-
er vier (10) zelfborgende bouten aan.
• Draai elke bout handvast aan totdat ze vlak aanliggen
tegen de stuurbevestiging. Draai ze vervolgens nog
eens 90 graden.
OPMERKING: Zet de schroeven niet te strak vast.
• Breng de hoofdasafdekking (6) aan. Zorg er bij bev-
estiging van de afdekking voor, dat de lippen van de
afdekking goed in de openingen vallen.
• Verwijder de stuurwieladapter (7) van het stuurwiel (5)
en schuif de adapter op de stuuras. Controleer of de
voorwielen in de rechtuitstand staan en plaats het wiel
op de naaf.
• Steek de bout (2) door de grote platte onderlegring (4)
en de borgring (3). Zet ze stevig vast.
• Klik het inzetstuk (1) in het midden op het stuurwiel.
1
2
3
4
5
6
7
8
9
10
11
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna TC 138L at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna TC 138L in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info