733805
7
Zoom out
Zoom in
Previous page
1/32
Next page
Do not try to catch falling sections or make cuts if the
operator is only attached with one rope. Always use
two safety ropes.
During felling operations, lift your hearing protection
immediately when the sawing is complete. It is
important that you hear sounds and warning signals.
You must understand the effects of kickback and
how to prevent them before you use this product.
See
Kickback information on page 14
and
Common
questions about kickback on page 14
for
instructions.
Do not use a product, battery or battery charger that
is defective.
Do not use the product if you are tired or while under
the influence of alcohol, drugs or medicine. Do not
use the product if you are in a condition that can
have a negative effect on your vision, alertness,
coordination or judgment. The risk of being tired
increases before the end of a work period.
Do not start a product unless the guide bar, saw
chain and all covers are assembled correctly. If not,
the drive sprocket can come loose and cause
serious injuries. See
Assembly on page 12
for
instructions.
Make sure that there is no risk that persons or
animals touch or influence on your control of the
product.
If you are not careful, the risk of kickback increases.
A kickback can occur if the kickback zone of the
guide bar accidentally touches a branch, tree or
other objects.
Do not hold the product with one hand. This product
is not safely controlled with one hand.
Hold the product tightly with your right hand on the
top handle and your left hand on the front handle.
Put your fingers and thumbs around the handles.
This decreases the effect of kickback and lets you
keep control of the product. Do not let go of the
handles!
Make sure that you have stable feet and that the saw
chain does not touch an object.
Do not use the product above shoulder height and
try not to cut with the guide bar tip.
Do not try pruning or limbing operations if you do not
have special training.
The vibration level increases if you cut with cutting
equipment that is incorrect or not correctly
sharpened. Cutting hardwoods, such as broadleaf
trees, causes more vibration than cutting softwoods,
such as conifers.
Overexposure to vibration can lead to circulatory
damage or nerve damage in persons who have
decreased circulation. Speak to your physician if you
experience symptoms of overexposure to vibration.
Such symptoms include numbness, loss of feeling,
tingling, pricking, pain, loss of strength, changes in
skin colour or condition. These symptoms usually
occur in the fingers, hands or wrists increases in cold
temperatures.
Prevent situations which you think is beyond your
capability.
959 - 006 - 15.05.2019
7
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna T535i XP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna T535i XP in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna T535i XP

Husqvarna T535i XP User Manual - German, Dutch, French - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info