477676

Husqvarna T50RS Manual

18
Zoom out
Zoom in
Previous page
1/21
Next page
BA
C
A
-Die Mutter lösen
-Unscrew the nut
-Haal de moer los
-Sbloccare il dado
-Desbloquear la tuerca
-Die Mutter wieder anziehen
-Re-tighten the nut
-Zet de moer weer vast
-Ribloccare il dado
-Bloquear la tuerca de nuevo
17
DE
EN
NL
IT
ES
REGLAJE DEL CABLE DE EMBRAGUE
REGLAJE DEL CABLE DE MARCHAATRÁS
REGOLAZIONE DEL CAVO
D’INNESTO
REGOLAZIONE DEL CAVO DI RETROMARCIA
AFSTELLING VAN DE
KOPPELINGSKABEL
AFSTELLING VAN DE KABELACHTERUITRIJDEN
ADJUSTING THE CLUTCH CABLE
ADJUSTING THE REVERSE GEAR CABLE
EINSTELLUNG DES KUPPLUNGSKABELS
RÜCKWÄRTSGANGKABEL EINSTELLEN
-Bis zum Antrieb der Maschine
-Until to obtain the training of the machine
-Totdat de aandrijving van de machine op
gang is gekomen
-Fino ad ottenere l’azionamento della macchina
-Hasta conseguir la tracción de la máquina
1: Die Zündkerze abklemmen (siehe Motorhandbuch)
2: Die Riemenabdeckung ausbauen
3: Im Vorwärtsgang prüfen, ob die Fräse dreht (A).
Falls sie nicht drehen , mit unserem Gebietshändler
Kontakt aufnehmen
1: Remove the cable from the sparking plug (see the motor manual)
2: Remove the belt housing
3: In forward gear, check rotation of the blades (A).
If they will not turn, contact our regional dealer.
1: Haal de bougie los (zie handleiding motor)
2: Haal de riemkap los
3: Controleer in de vooruit dat de frees draait (A).
Indien ze niet draaien, contact opnemen met onze regionale dealer.
1: Scollegare la candela (vedi manuale motore)
2: montare il carter della cinghia
3: Posizione marcia avanti, verificare la rotazione della fresa (A).
Se non gira, contattare il nostro rivenditore regionale.
Funktionsfehler beim Rückwärts-gang auftritt,
das Kabel wie folgt einstellen:
After several hours’ use, if reverse motion mal-
functions,adjust the cable as follows:
Indien na een paar gebruiksuren een storing
optreedt in de achteruit, moet de kabel als volgt
worden afgesteld
Qualora la retromarcia non funzionasse bene
dopo un utilizzo di qualche ora, regolare il cavo
nel modo seguente :
1: Desenchufar la bujía (ver manual motor)
2: Desmontar el capot correa
3: Posición marcha hacia adelante, verificar la rotación de la fresa (A).
Si no giran, contactar nuestro vendedor regional.
Si después de unas cuantas horas de utilización, la
marcha atrás presenta algún fallo de funciona-mien-
to, ajuste el cable de la manera siguiente:
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna T50RS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna T50RS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info