Manual Husqvarna T425 (page 32 of 340) (English, German, Dutch, French, Italian, Portuguese, Spanish)

477656

Zoom out

Zoom in

1/340

MAINTENANCE

32 – English

Starter

Changing a broken or worn starter cord

• Loosen the screws that hold the starter against the

crankcase and remove the starter.

• Pull out the cord approx. 30 cm and hook it into the

notch in the r

im of the pulle

y. Release the recoil spring

by letting the pulley rotate slowly backwards.

• Undo the screw in the centre of the pulley and remove

the pulle

. Insert and fasten a new starter cord to the

pulley. Wind approx. 3 turns of the starter cord onto

the pulley. Connect the pulley to the recoil spring so

that the end of the spring engages in the pulley. Fit the

screw in the centre of the pulley. Insert the starter cord

through the hole in the starter housing and the starter

handle. Make a secure knot in the end of the starter

cord.

Tensioning the recoil spring

• Hook the starter cord in the notch in the pulley and

turn the starter pulley about 2 turns clockwise.

Note! Check that the pulley can be turned at least a

further 1/2 turn when the starter cord is pulled all the

way out.

Changing a broken recoil spring

• Lift up the starter pulley. See instructions under the

heading Changing a broken or worn starter cord.

Remember that the recoil spring is coiled under

tension in the starter housing.

• Remove the cassette with the recoil spring from the

star

ter

• Lubricate the recoil spring with light oil. Fit the

cassette with recoil spring in the starter. Fit the starter

pulley and tension the recoil spring.

WARNING! When the recoil spring is

wound up in the starter housing it is

under tension and can, if handled

carelessly, pop out and cause personal

injury.

Care must be exercised when replacing

the return spring or the starter cord.

Wear protective glasses and protective

gloves.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna T425 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 20,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna T425 Manual

Product: