780495
86
Zoom out
Zoom in
Previous page
1/142
Next page
14 WHEELS, TIRES
84
E01125-12
Pull the rear wheel back and mount wheel spindle 3
with the washer and chain adjuster 4.
Guideline
Mount left and right chain adjusters 4in the same
position.
Mount nut 2with washer.
Make sure that the chain adjusters are fitted correctly on
the screws.
Check the chain tension. ( p. 68)
Tighten nut 2.
Guideline
In order for the rear wheel to be correctly aligned, the
markings on the left and right chain adjusters must be
in the same position relative to reference markings B.
Nut, rear wheel
spindle
M14x1.5 90 Nm (66.4 lbf ft)
Position wheel speed sensor 5in the hole.
Mount and tighten screw 6.
Guideline
Screw, wheel
speed sensor
M6 7 Nm (5.2 lbf ft)
Loctite®243™
F02843-10
(Option: Cast wheels)
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
Change the rear wheel bearing.
Clean and grease shaft seal rings 1and contact sur-
faces Aof the spacers.
Long-life grease ( p. 132)
Clean the thread of the wheel spindle and axle nut.
Clean and lightly grease the wheel spindle.
Long-life grease ( p. 132)
Clean the contact areas on the brake caliper bracket and
link fork.
Mount the damping rubber pieces and rear sprocket car-
rier on the rear wheel.
Insert the narrow spacer into the side of the rear
sprocket.
Insert the wide spacer into the side of the brake disc.
Position the rear wheel.
The brake linings are correctly positioned.
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna Svartpilen 401 - 2022 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna Svartpilen 401 - 2022 in the language / languages: English as an attachment in your email.

The manual is 7.63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Husqvarna Svartpilen 401 - 2022

Husqvarna Svartpilen 401 - 2022 User Manual - German - 146 pages

Husqvarna Svartpilen 401 - 2022 User Manual - Dutch - 144 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info