Manual Husqvarna ST 427T (page 6 of 200) (English, German, Dutch, French, Italian, Spanish)

734468

Zoom out

Zoom in

1/200

• When cleaning, repairing or inspecting the product,

stop the engine and make certain the augers and all

moving parts have stopped. Disconnect the spark

plug wire and keep the wire away from the plug to

prevent someone from accidentally starting the

engine.

• Do not run the engine indoors, except when starting

the engine and for transporting the product in or out

of the building. Open the outside doors; exhaust

fumes are dangerous.

• Exercise extreme caution when operating on slopes.

• Never operate the product without proper guards,

and other safety protective devices in place and

working.

• Never direct the chute deflector toward people or

areas where property damage can occur. Keep

children and others away.

• Do not overload the product capacity by attempting

to clear snow at too fast a rate.

• Never operate the product at high transport speeds

on slippery surfaces. Look behind and use care

when operating in reverse.

• Disengage power to the augers when the product is

transported or not in use.

• Use only attachments and accessories approved by

the manufacturer of the product (such as wheel

weights, counterweights, or cabs).

• Never operate the product without good visibility or

light. Always be sure of your footing, and keep a firm

hold on the handles. Walk; never run.

• Never touch a hot engine or muffler.

Work area safety

• Thoroughly inspect the area where the equipment is

to be used and remove all doormats, sleds, boards,

wires, and other foreign objects.

• Disengage all clutches and shift into neutral before

starting the engine (motor).

• Do not operate the product without wearing

adequate winter garments. Avoid loose fitting

clothing that can get caught in moving parts. Wear

footwear that will improve footing on slippery

surfaces.

• Handle fuel with care; it is highly flammable.

• Use an approved fuel container.

• Never add fuel to a running engine or hot engine.

• Fill fuel tank outdoors with extreme care. Never

fill fuel tank indoors.

• Never fill containers inside a vehicle or on a truck

or trailer bed with a plastic liner. Always place

containers on the ground, away from your

vehicle, before filling.

• When practical, remove gas-powered equipment

from the truck or trailer and refuel it on the

ground. If this is not possible, then refuel such

equipment on a trailer with a portable container,

rather than from a gasoline dispenser nozzle.

• Keep the nozzle in contact with the rim of the fuel

tank or container opening at all times, until

refueling is complete. Do not use a nozzle lock-

open device.

• Replace gasoline cap securely and wipe up

spilled fuel.

• If fuel is spilled on clothing, change clothing

immediately.

• Use extension cords and receptacles as specified by

the manufacturer for all units with electric drive

motors or electric starting motors.

• Adjust the auger housing height to clear gravel or

crushed rock surface.

• Never attempt to make any adjustments while the

engine (motor) is running (except when specifically

recommended by the manufacturer).

• Always wear safety glasses or eye shields during

operation or while performing an adjustment or

repair to protect eyes from foreign objects that may

be thrown from the machine.

Personal protective equipment

Always use the correct personal protective equipment

when you operate the product. This includes, at

minimum, sturdy footwear, eye protection and hearing

protection. Personal protective equipment does not

erase the risk of injury but may decrease the grade of

injury if an accident occurs.

• Always wear safety glasses or eye protection while

you operate the product or do maintenance or

repairs.

• Always wear appropriate winter garments when you

operate the product.

• Always use heavy-duty slip-resistant boots with good

ankle support while you operate the product.

• Do not wear loose fitting clothing that can get caught

in moving parts.

• Use approved protective gloves, if necessary. For

example, when attaching, examining or cleaning the

blade.

• Always use approved ear protection while you

operate the product. Noise for a long period can

cause noise-induced hearing loss.

Safety devices on the product

• Make sure that you regularly do the maintenance to

the product.

• The life of the product increases.

• The risk of accidents decreases.

Let an approved dealer or an approved service

center regularly examine the product to do

adjustments or repairs.

• Do not use a product with damaged protective

equipment. If the product is damaged, speak to an

approved service center.

6891 - 005 - 08.01.2020

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 427T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 427T Manual

Product: