Manual Husqvarna ST 327T (page 22 of 84) (English, German, Dutch, French, Italian, Spanish)

579232

Zoom out

Zoom in

1/84

TRANSPORT AND HEIGHT ADJUSTMENT OF

SNOW THROWER

To transport

When transporting your snowthrower, be sure to disengage the transmission

by placing freewheel control into FREE WHEEL po si tion and height adjust-

ment locator into TRANSPORT MODE position.

• Pull freewheel control out to FREEWHEEL position (1).

• Set height adjustment into TRANSPORT MODE (2).

• To reengage transmission, push control back in.

SET HEIGHT ADJUSTMENT

Your snow thrower is equipped with a foot controlled height adjustment

mechanism.

There are four height positions for operation

1. PACKED SNOW

2. NORMAL OPERATION

3. TRANSPORT

4. FLOAT

To operate the height adjust mechanism, using your foot, push down on the

pedal (A), tilt the unit to align the pins with the selected height position and

slowly release foot pressure until the pins are seated in the desired height

setting.

IMPORTANT: Your model snow thrower is equipped with an oil expansion

tank (B) attached to the hydrostatic transmission. As you run your snow

thrower, the oil level will rise in this tank as the oil heats up and recess as

the oil cools. This is normal operation. You do not need to add oil to this tank

as part of regular maintenance.

NOTE: When you receive a new unit that has not been run, the oil level in

the expansion tank may be somewhere between the bottom of the tank and

near the top of the tank. After initial operation the oil level may drop because

of the elimination of air bubbles in the oil line. Normal cold oil level is near

the bottom of the tank. Do not add additional oil.

TRANSPORT UND HÖHENVERSTELLUNG DES

SCHNEERÄUMERS

Für den transport

Für den Transport des Schneeräumers muss das Getriebe ausgerückt werden.

Bringen Sie dazu die Freilaufsteuerung in die FREILAUF- Position und den

Höhenverstellmechanismus in die TRANSPORTMODUS- Position.

• Freilaufsteuerung in die FREILAUF- Position ziehen (1).

• Höhenverstellmechanismus in TRANSPORTMODUS bringen (2).

• Um das Getriebe wieder einzurücken, die Steuerung wieder hinein

schieben.

Höhenverstellung einstellen

Ihr Schneeräumer ist mit einem fußgesteuerten Höhenverstellmechanismus

ausgestattet.

Es gibt vier Betriebspositionen

1. GEPACKTER SCHNEE

2. NORMALER BETRIEB

3. TRANSPORT

4. SCHWIMMEN

Um den Höhenverstellmechanismus zu betätigen, mit dem Fuß das Pedal (A)

nach unten treten, die Maschine neigen, um die Stifte auf die ausgewählte

Höhenposition einzustellen, und dann langsam den Druck des Fußes vom

Pedal zu nehmen, bis die Stifte in der gewünschten Höheneinstellung ar-

retieren.

WICHTIG: Ihr Schneeräumermodell ist mit einem speziellen Öl-Ausdeh-

nungsbehälter ausgestattet (B) , der am Hydrogetriebe montiert ist. Wenn Ihr

Schneeräumer arbeitet, steigt der Füllstand in diesem Öl-Ausdehnungsbe-

hälter an, da sich das Getriebeöl während des Betriebs erhitzt und ausdehnt

bzw. nach beendetem Betrieb auch wieder abkühlt und zusammenzieht.

Das ist normal. Sie brauchen daher in diesen Öl-Ausdehnungsbehälter bei

den regelmäßig anfallenden Wartungen kein Öl nachfüllen.

HINWEIS: Wenn Sie ein neues Gerät geliefert bekamen, das noch nie ge-

laufen ist, befindet sich der Ölstand im Ölexpansionsbehälter irgendwo dem

unteren und oberen Rand des Behälters. Nach der ersten Inbetriebnahme

sinkt der Ölstand wahrscheinlich, weil die Lufteinschlüsse in der Ölleitung

entfernt sind. Der normale Füllstand bei kaltem Gerät ist in der Nähe der

Behälterunterseite. Fügen Sie kein zusätzliches Öl hinzu.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 327T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna ST 327T Manual

Product: