579232
17
Zoom out
Zoom in
Previous page
1/84
Next page
17
G
F
E
D
C
B
A
Install discharge chute / chute rotator head
NOTE: The multi-wrench provided in your parts bag may be used to install
the chute rotator head.
1. Place discharge chute assembly on top of chute base with discharge
opening toward front of snow thrower.
2. Position chute rotator head (A) over chute bracket (B). If necessary,
rotate chute assembly to align square and pin on underside of chute
rotator head with holes in chute bracket.
3. With chute rotator head and chute bracket aligned, position chute rotator
head on pin (C) and threaded stud (D) of mounting bracket (E).
4. Install 3/8" washer (F) and lock nut (G) on threaded stud and tighten
securely.
Installation der auswurfrinne / der drehvorrichtung
für die auswurfrinne
HINWEIS: Der Kombischraubenschlüssel in der Zubehörtasche kann zur
Installation der Drehvorrichtung für die Auswurfrinne verwendet werden.
1. Setzen sie die Auswurfrinnenvorrichtung auf den dafür vorgesehenen
Sockel auf, mit der Auswurföffnung nach der Vorderseite der Schneefräse
gerichtet.
2. Setzen Sie die Drehvorrichtung für die Auswurfrinne (A) auf die Rinnen-
halterung auf (B). Drehen Sie die Rinnenvorrichtung gegebenenfalls so
lange, bis der viereckige und der runde Metallstift auf der Unterseite der
Drehvorrichtung mit den entsprechenden Löchern in der Rinnenhalterung
in eine Linie gebracht sind.
3. Mit der Drehvorrichtung und der Rinnenhalterung in einer Linie, setzen
Sie die Drehvorrichtung auf den Metallstift (C) und auf die Gewindes-
tiftschraube an der Aufhängung (E) auf.
4. Setzen Sie die 3/8" Unterlegscheibe (F) und die Kontermutter (G) auf
die Gewindestiftschraube auf und ziehen Sie sie fest an.
Installez la goulotte d’évacuation / tête rotative de la
goulotte d’évacuation
REMARQUE: Les multiples clés fournies avec vos sacs à pièces peuvent
être utilisées pour installer la tête rotative de la goulotte d’évacuation.
1. Placez l’assemblage de la goulotte d’évacuation sur la partie supérieure
de la base d’évacuation avec la décharge ouverte vers le devant de la
souffleuse.
2. Positionnez la tête rotative de la goulotte d’évacuation (A) par-dessus
le support d’évacuation (B). Si nécessaire, pivotez l’assemblage de la
goulotte d’évacuation afin d’aligner le carré et l’axe sur le dessous de la
tête rotative de la goulotte d’évacuation avec les trous dans le support
de la goulotte d’évacuation.
3. Avec la tête rotative de la goulotte d’évacuation et le support d’évacuation
alignés, positionner la tête rotative sur l’axe (C) et le goujon fileté (D) du
support de montage (E).
4. Installez de la rondelle 3/8" (F) et de l’écrou freiné (G) sur le goujon fileté
et serrez solidement.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna ST 327T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 327T in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 6,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info