579252

Husqvarna ST 227P Manual

14
Zoom out
Zoom in
Previous page
1/84
Next page
14
A
Unfold upper handle
1. Raise upper handle (A) to the operating position.
2. Remove and discard temporary mounting bolts (E). Adjust the handle
height to desired position using the appropriate mounting holes (B). Install
carriage bolts (D) that are supplied in the bag of parts and tighten lower
handle knobs (C) securely.
3. Install the additional carriage bolts (D) and handle knobs (C) that are
supplied in the bag of parts to secure upper handle (F) to lower handle
(G).
Oberen griff aufklappen
1. Heben Sie den oberen Griff (A) in die Betriebsposition an.
2. Entfernen und entsorgen Sie temporäre Befestigungsschrauben (E). Stellen
Sie die Griffhöhe in die gewünschte Position mit den entsprechenden
Befestigungslöcher (B). Installieren Schlossschrauben (D), die in der
Tasche von Teilen versorgt werden und ziehen unteren Griffknöpfe (C)
sicher.
3. Installieren Sie die zusätzlichen Schlossschrauben (D) und Griff Knöpfe
(C), die in der Tasche von Teilen geliefert werden, zu den oberen Griff
(F) am unteren Griff (G) zu sichern.
Dépliez le levier de commande supérieur
1. Relever le guidon supérieur (A) jusqu'en position de fonctionnement.
2. Retirez et jetez les boulons de fixation temporaires (E). Réglez la hauteur
de la poignée à la position désirée à l'aide des trous de montage (B).
Installez les boulons de carrosserie (D) qui sont fournis dans le sac de
pièces et serrez les poignées du guidon inférieur (C) en toute sécurité.
3. Installez les boulons de carrosserie supplémentaires (D) et des poignées
de levier (C) qui sont fournis dans le sac de pièces à fixer le levier supérieur
(F) à la poignée inférieure (G).
Abrir la empuñadura superior
1. Levante el asa superior (A) a su posición de operación.
2. Retire y deseche los pernos de montaje temporales (E). Ajuste la altura del
mango a la posición deseada usando los agujeros de montaje adecuados
(B). Instale el perno del soporte (D) que se suministran en la bolsa de
piezas y apriete manillas del mango inferior (C) de forma segura.
3. Instale los pernos de carro adicionales (D) y manillas (C) que se suministran
en la bolsa de las piezas que sujetan la manija superior (F) al mango
inferior (G).
Het uitpakken van de bovenste hendel
1. Zet de bovenste handgreep (A) in de werkstand.
2. Verwijder en gooi tijdelijke bevestigingsbouten (E). De handgreep hoogte
gewenste positie met de juiste montagegaten (B). Installeer slotbouten
(D) die worden geleverd in de zak van de onderdelen en draai onderste
hendel knoppen (C) stevig vast.
3. Installeer de extra slotbouten (D) en handgreep knoppen (C) die worden
geleverd in de zak delen bovenhandgreep (F) vast aan onderste hendel
(G).
Impugnatura superiore aperta
1. Sollevare l'impugnatura superiore (A) portandola nella posizione operativa.
2. Rimuovere e gettare viti di fissaggio temporanei (E). Regolare l'altezza
della maniglia nella posizione desiderata utilizzando i fori di fissaggio
appropriati (B). Installare bulloni di trasporto (D) che vengono forniti nel
sacchetto delle parti e serrare le manopole maniglia inferiore (C) in modo
sicuro.
3. Installare i bulloni di trasporto aggiuntivi (D) e gestire i pomelli (C) che
vengono forniti nel sacchetto delle parti per fissare la maniglia superiore
(F) a impugnatura inferiore (G).
C
B
G
D
D
F
E
C
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Husqvarna ST 227P at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna ST 227P in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info