Manual Husqvarna SR600-2 (page 250 of 276) (All languages)

579287

250

Zoom out

Zoom in

1/276

SAFETY INSTR

UCTIONS

250

–

English

The engine must be switched off before moving.

4 Never put the machine down with the engine running

unless you have it in clear sight.

Basic w

orking techniques

•

Always ensure you have a safe and stable working

position.

• Always use both hands to hold the machine. Hold the

machine at the side of your body.

• Make sure that your hands and feet do not come near

the brush when the motor is running.

• When the motor is switched off, keep your hands and

feet away from the brush until it has stopped

completely.

• The sweeper works best when the rubber lamellas

can glide or 'stroke' the working surface. New or

replaced brush drums tend to fasten or drag on hard

surfaces and shall therefore be 'run in' thoroughly

before use. This can be done easily by operating the

machine at full throttle for 3-5 minutes in loose gravel

or similar grinding material. After being run in, the

sweeper will be able to move large amounts of

material from snow or puddles to heavier objects such

as gravel or wood chips. In time, you will learn how the

sweeper works but you must observe safety

precautions from the very beginning.

• Always slow the engine to idle speed after each

working operation. Long periods at full throttle without

any load on the engine (i.e. without the resistance that

the cutting attachment exerts on the engine when you

are using the machine) can lead to serious engine

damage.

• If heavy vibration occurs, stop the machine.

Disconnect the HT lead from the spark plug. Check

that the machine is not damaged. Repair any damage.

• Run the sweeper at full (or nearly full) throttle with the

rubber lamellas resting on the surface.

NOTE!

It is both tiresome and unnecessary to lift up or hold the

rubber lamellas above the surface while working.

• When clearing narrow surfaces such as paths, the

machine can be used so that it throws materials

straight in front of you. If you want to work on wider

surfaces, you may need to work at an angle so that

strands form on one side. Strands comprising light

materials can be collected into one row or pile for later

removal while hard or more bulky materials may need

collecting in several strands.

ARNING! Watch out for thrown objects.

Always wear eye protection. Never bend

over the brush drum. Stones, rubbish,

etc. can be thrown up into the eyes

causing blindness or serious injury.

Keep unauthorised persons at a

distance. Children, animals, onlookers

and helpers should be kept outside the

safety zone of 15 m. (50 ft.) Stop the

machine immediately if anyone

approaches. The gear can get hot during

use and may remain so for a while

afterwards. You could get burnt if you

touch it.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Husqvarna SR600-2 in the language / languages: All languages as an attachment in your email.

The manual is 41,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Husqvarna SR600-2 Manual

Product: